> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
I never heard that. It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it? Units per hour and dollars per unit was never its strength. It was always going to be small things (and if anything big grew out of it, those would naturally transition to the more efficient manufacturing at scale).
Vibe coding, on the other hand, is competing against hand coding, and for many use cases is considerably more efficient. It’s clearly replacing a lot of hand coding.
BTW, I think a lot of people were/are greatly overestimating the value of coding to business success. It’s fungible from a macro perspective, so isn’t a moat by itself. There’s certainly a cost, but hardly the only one if you’re trying to be the next big startup (for that, the high cost of coding was useful — something to deter potential competitors; you’ll have to make up the difference in some other way now).
Also, software is something that already scaled really well in the way businesses need it to — code written once, whether by human or LLM, can be executed billions of times for almost nothing. Companies will be happy to have a way to press down the budget of a cost center, but the delta won’t make or break that many businesses.
As always, the people selling pick-axes during the gold rush will probably do the best.
I think volume and cost was never really the issue. Even if 3D printing something was 3x the cost it could justify itself just by the sheer amount of overhead it can otherwise remove. Ultimately what limits 3D printing is what you can make with it, and the fact that it doesn't remove assembly as a manufacturing step. If you could 3D print full products then I think the promised revolution would have happened. (As it stands 3D printing has already had a massive impact on manufacturing. More stuff than you would think is 3D printed now, it's just not complete consumer items)
> BTW, I think a lot of people were/are greatly overestimating the value of coding to business success.
Fully agree - We already saw dev prices drop significantly when offshore dev shops spun up. I've had great, and also horrible experiences working with devs that could produce lines of code at a fraction of the price of any senior type dev.
The higher paid engineers i've worked with are always worth their salary/hourly rate because of the way they approach problems and the solutions they come up with.
Agents are great at building out features, i'm not so sure about complex software that grows over time. Unless you know the right questions to ask, the agent misses alot. 80/20 doesn't work for systems that need 100% reliability.
> The higher paid engineers i've worked with are always worth their salary/hourly rate because of the way they approach problems and the solutions they come up with.
I'm honestly just happy at the moment, because our two junior admins/platform engineers have made some really good points to me in preparation for their annual reviews.
One now completed his own bigger terraform project, with the great praise of "That looks super easy to maintain and use" from the other more experienced engineers. He figured: "It's weird, you actually end up thinking and poking at a problem for a week or two, and then it actually folds into a very small amount of code. And sure, Copilot helped a bit with some boilerplate, but that was only after figuring out how to structure and hold it".
The other is working on getting a grip on running the big temperamental beast called PostgreSQL. She was recently a bit frustrated. "How can it be so hard to configure a simple number! It's so easy to set it in ansible and roll it out, but to find the right value, you gotta search the entire universe from top to bottom and then the answer is <maybe>. AAaah I gotta yell at a team". She's on a good way to become a great DBA.
> Agents are great at building out features, i'm not so sure about complex software that grows over time. Unless you know the right questions to ask, the agent misses alot. 80/20 doesn't work for systems that need 100% reliability.
Or if it's very structured and testable. For example, we're seeing great value in rebuilding a Grafana instance from manually managed to scripted dashboards. After a bit of scaffolding, some style instructions and a few example systems, you can just chuck it a description and a few queries, it just goes to successful work and just needs a little tweaking afterwards.
Similar, we're now converting a few remnants of our old config management to the new one using AI agents. Setup a good test suite first, then throw old code and examples of how the new config management does it into the context and modern models do that well. At that point, just rebuilding the system once is better than year-long deprecation plans with undecided stakeholders as mobile as a pet ferret that doesn't want to.
It's really not the code holding the platform together, it's the team and the experiences and behaviors of people.
It makes sense for junior admins and junior platform engineers to leverage LLM's but I'd be highly skeptical for the future skillset of any junior software engineer who leverages LLM's right off the bat, unless we have already moved that goalpost.
You’re not wrong. You’re not the only one saying this either. Though, I’m currently of the mind that the concern is overblown. I’m finding Opus 4.6 is only really capable of solving a problem when the prompt explains the fix in such concrete detail that coding is incredibly straightforward. For example, if the prompt has enough detail that any decent human programmer would read it and end up writing basically the same code then Claude can probably manage it too.
While I haven’t used other models like Codex and Gemini all that much recently, Anthropic’s is one of the top-tier models, and so I believe the others are probably the same in this way.
A junior’s mind will not rot because the prompt basically has to contain detailed pseudocode in order to get anywhere.
> He figured: "It's weird, you actually end up thinking and poking at a problem for a week or two, and then it actually folds into a very small amount of code. And sure, Copilot helped a bit with some boilerplate, but that was only after figuring out how to structure and hold it".
Let me just get you that Fred Brooks quote, now where was it...? Ah, yes, here's one:
We didn't even have to offshore for lots of bad code to be written.
Looks at the scores of Ycombinator startups that wrote a shitload of awful code and failed. Good ideas, pretty websites, but not a lot of substance under the hood. The VC gathering aspect and online kudos was way more important to them than actually producing good code and a reliable product that would stand the test of time.
Pretty much the most detestable section of the HN community. IMNHSO. I notice they're much quieter than usual since the whole vibe coding thing kicked off.
> Looks at the scores of Ycombinator startups that wrote a shitload of awful code and failed.
This can also be restated as, look at all the startups that wrote a shitload of awful code and succeeded.
That’s an indicator code quality doesn’t matter at macro scales. We already knew this though even if we didn’t explicitly say it. It’s more about organization, coordination, and execution than code.
This seems like it's reading too much into things. I'm sure driving an ambulance slower vs faster doesn't make a difference to survival in most cases, but on the margins it absolutely does.
Startups are also quite different from ambulances; surviving and minimising patient harm isn't the most important thing for a startup. Instead, it's building a profitable and valuable business. You're not just worrying about the margins, you're also hoping to squeeze out every bit of growth you can.
> That’s an indicator code quality doesn’t matter at macro scales.
I think it can though. It just depends. Having high quality code and making good technical choices can matter in many ways. From improving performance (massively) and correctness, to attracting great talent. Jane Street and WhatsApp come to mind, maybe Discord too. Just like great design will attract great designers.
I also think it might matter even more in the age of AI Agents. Most of my time now is spent reviewing code instead of writing code, and that makes me a huge bottleneck. So the best way to optimize is to make the code more readable and having good automated checks to reduce the amount of work I need to do, like static types, no nulls, compilation, automated tests, secondary agent reviews, etc.
I mean, look at all the startups that succeeded despite being complete shitshows behind the scenes... the baseline for leadership, organization, coordination or, hell, execution for a startup to succeed isn't exactly high either.
One thought experiment I keep having when I see LLM hype: imagine if our outsourcing companies could be as blasé about copyright as OpenAI, and how profitable they could be.
I mean, rename some dudes over there to ‘transformer’, and let them copy & paste from GitHub with abandon… I know we could get a whole browser for less than a few grand.
We wouldn’t, because it’d be copyright-insane. But if we just got it indirect enough, maybe fed the info to the copiers through a ‘transforming’ browser to mirror the copyright argument, I bet we could outperform OpenAI in key metrics.
Coding is formalizing for the compiler. The other 99% of the job is softly getting the PHB not to fuck the entire company and being unique in not doing dumb shit everyone thinks is popular now but will regret soon. It’s all like IT tribal tattoos. Barely cool for a couple of years, and then a lifelong source of shielded regret.
I did, a lot, maybe fifteen years ago. There was a lot of talk about a "3D printing revolution" and being years away from being able to make whatever you want at home. For a while, the "maker" moniker was strongly associated with home manufacturing maximalists.
I still don't get the point the article is making, though. That 3D printer thinking was obviously naive because it underestimated the difficulty of mechanical design and the importance of the economies of scale. Using AI to "write" or "code" is a lot easier than turning a vague idea for a household good into a durable and aesthetic 3D print, so it's apples to oranges.
There are other things that the vibecoding movement is underestimating - when you pay a SaaS vendor, you're usually not paying for code as much as for having a turnkey solution where functionality, security, infrastructure, and user support are someone else's problem. But I think that's pretty much where the parallels end.
Also hiring. It's easier to find people with JIRA experience than people in your vibe-coded ticket manager, even if it is technically superior for your application.
If there is any commonality between the 3D printing craze and vibe-coding, they're both renditions of "just because you can, doesn't mean you should".
I was a kid at the time, but adults, magazines, and other children convinced me that 3D printing at home would likely replace a huge number of products. This included extremely optimistic speculation, like printers producing smart phones or houses. Then I dated a boy who used his 3D printer to substitute The Container Store at a higher cost with greater effort and lower quality, and that soured me on the concept.
I think we'll see this slowly march along. I just made some custom-designed speaker tilt mount things for my desk. Sure, it's a trivially simple example, but a lot of things are. I was able to get the exact angle I wanted, bigger than most and in a design I liked, crafted by AI in 5 minutes, and on my desk by the next morning and for a fraction of the price of a Chinese made Amazon version.
It's no replicator, but give it 5 years and it might be surprising how useful it is.
> Then it was a lot of “self replicating printers” for quite a while, which never has been a real thing.
3D-printed 3D printers got quite far; the reason why this topic got out of perception by people who are not 3D printing nerds is rather that for mass production of 3D printers there exist much better processes.
What was realized was that up to a certain amount of parts, 3D printing these parts on a 3D printer works really well. You can find a lot of designs of such 3D printers on the internet.
Concerning the progress here, also observe that over the last years, home 3D printers got a lot better with respect to handling "engineering materials". These materials are very useful if you want to (partly) 3D-print a 3D printer, but this development is often not associated with "3D-printing 3D printers". :-)
Then you get to parts which can be printed on a 3D printer, but these parts will not be of the same quality as parts that can easily be bought, such as belts etc. The Mulbot is a design that takes this approach very far:
And then you get to parts that are nearly impossible to print on a 3D printer ...
So, after there was a consensus where the boundaries lie how much a 3D printer can sensibly be 3D-printed, people started looking at other manufacturing techniques that exist for producing parts of 3D printers, and started considering
1. could and how far could a machine for this process be 3D-printed (or produced on a 3D-printed machine)?
2. could we bring such a machine to home manufacturing, too (so that people can easily build such a machine at home)?
Machines that were considered for this were, for example, CNC mill (3, 4 and 5 axis), CNC lathe, pick and place machines (for producing PCBs), ...
There do exist partial implementations of such machines, just to give some examples:
- lots of designs of CNC mills that use 3D-printed parts. I won't give a list here, but just want to mention that the "Voron Cascade" project wants to do for home 3 axis CNC milling what the Voron did for 3D printing. Rumors on the internet say that the Voron Cascade is well on the way, but had quite a lot of delays with respect to announced release dates.
Thus: I hope I could give evidence that in the last years there still were a lot of developments towards the far goal of "self-replicating 3D printers", but these developments were rather silent, impressive developments instead of loud, obtrusive marketing stunts.
Just like with vibecoding complains, have you tried the latest models (of 3d printers)? Specifically, Bambu's latest models make the printer a device to just use rather than the project itself. It's the Apple of 3d printing. Previously, you'd spend hours on calibrating and leveling nonsense. Latest models don't have this problem. Open the app on your phone, (doom)scroll until you find something, and just hit print from your phone. You can make it more complicated as desired, but it's not necessary to get something out of your printer.
Which apes vibecoding. ChatGPT 3.5 was laughably bad compared to codex 5.3, but if you're basing your opinion on 3.5's performance, your opinion's out of date.
I recently wrote a blog post about exactly this, and I agree with your perspective. Vibe coding helps with showing other people your idea and get them to understand it, try it and, most importantly, help you fail fast. But as the product matures, the gains of using LLM's and agentic engineering will go from 10000% efficiency to something like maybe 30(?)% productivity gain? Which is still awesome, of course.
"The real test of Vibe coding is whether people will finally realize the cost of software development is in the maintenance, not in the creation."
It's not awesome, not for us. 30% productivity gain would be enormous. Just imagine 30% of developers losing their jobs, in addition to outsourcing and all the new graduates flooding out of colleges after CS has been hyped so much in the recent years.
I really doubt that 30% productivity gain would result in 30% developers losing their jobs. Believing this would require an assumption that businesses and economies will never grow.
There was certainly a contingent who believed that 3d printing was going to replace all other forms of manufacturing. It was even going to make custom food for us on order.
If you balked at the idea, then you were the bad guy, or treated with pity for being so out of touch. Usually you got the Kubler-Ross Stages thrown at you.
Definitely a fantasy land ideal. Much like pitches from the Free Software Foundation of a world without copyright and IP. It's just never going to exist because reality just isn't that way.
> It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it?
It didn’t and I’m not sure anyone who knew anything about at-scale manufacturing ever saw it that way. Injection molding is far cheaper per unit and more accurate.
But 3D printing has made a major impact on prototyping. Parts that would have taken serious machine shop work or outsourcing can be printed in a few hours. It really changed the game for mechanical engineers.
In terms of vibe coding, time to demo/prototype is greatly reduced. That definitely takes time and cost away from R&D. But I don’t know that it’s had much impact on transfer to manufacturing, which can easily be the hard final 20%.
> Vibe coding, on the other hand, is competing against hand coding, and for many use cases is considerably more efficient. It’s clearly replacing a lot of hand coding.
It seems like a lot of vibe coders are people who otherwise wouldn't be coding at all.
If 90% of code is for hobbies that don't cost anyone anything when it breaks, great - but launching rockets into space with million or billion dollar payloads is akin to software that makes millions or billions of dollars, and vibeslop is simply a liability at best in any real use case past a weekend hobby project.
It was promised but it never materialised. Everyone was saying we'd all have a 3D printer at home and there'd be no market for niche products any more because we'd just print them on demand.
> Almost nobody talked about “getting manufacturing back to the US”.
I guess the President of the United States is an almost nobody. Obama's 2013 State of the Union hyped up 3-D printing explicitly as a tech that would be bringing manufacturing back to the U.S. The U.S. government made public-private partnerships with maker spaces and fab facilities in hollowed out Rust Belt cities, and Obama mentioned it by name in the most important and viewed policy speech the President gives each year.
> “A once-shuttered warehouse is now a state-of-the art lab where new workers are mastering the 3-D printing that has the potential to revolutionize the way we make almost everything,” Obama said. [...] Obama announced plans for three more manufacturing hubs where businesses will partner with the departments of Defense and Energy “to turn regions left behind by globalization into global centers of high-tech jobs.” (https://edition.cnn.com/2013/02/13/tech/innovation/obama-3d-...)
>Companies will be happy to have a way to press down the budget of a cost center, but the delta won’t make or break that many businesses.
Software companies spend a huge amount of money on having software written. Why would significantly altering the cost structure not make or break companies?
I also don't think the "maker movement" disappeared, it's just that the bar for making stuff is so much lower now that anyone and their grandmother can do it.
In the past weeks I:
- 3D printed custom cups that fit onto a pet feeder to prevent ants from getting to our cat food
- 3D printed custom mounts to mount 3W WS2812 LEDs to illuminate Chinese New Year lanterns and connected them to an ESP32 WLED box connected to home assistant
- Connected an vision language model to a security camera that can answer questions about how many times a cat has eaten, drank water, used the toilet, and inform us about any things in the room that look abnormal
- Custom laser cutted a wall fitting for a portable heat pump input and output condenser hoses and added a condensate pump to the contraption, it saves us $200/month in heating costs
- Custom designed a retrofit for a sliding door that accepts a Nuki smart lock that wasn't designed for this type of door.
- Custom laser cutted a valentines day card in Chinese paper cutting style that was generated with many rounds of back and forth prompting with Gemini, then converted to SVG and cut
- My wife and I thought IKEA SKADIS pegboards would look better if they were made out of bamboo plywood, so I shoved a sheet of bamboo into my laser cutter and had it cut out a pegboard that looked much nicer, sprayed it with lacquer, then attached it to the wall with 3D printed mounting hardware. The SVG for the pegboard was generated by a script written by Cursor and took a couple of minutes.
- Having an ESP32 feed a camera image to an LLM and then do something with the result is a piece of cake. A box that "sprays water to deter the cat if the cat jumps on the kitchen counter" is a 1-hour job after you order the components from Amazon, and an LLM will build that parts list for you, too.
- Reverse enginereed the firmware of a Unifi Chime to upload more chime sounds than the UI limits you to, so that I can have Unifi Protect announce if there is an intruder somewhere late at night and where. Cursor reverse-engineered the firmware .bin for me.
A lot of this could have been worth sharing 10 years ago. Now all of this is just "normal life in 2026" so you don't hear about it much. I'm used to thinking of something and then physically having it <12 hours later. It's no longer an undertaking. It's not news anymore.
The bar for "news-worthiness" for makers these days? This guy built an entire city for his cats, with a full functional subway system and everything ...
> BTW, I think a lot of people were/are greatly overestimating the value of coding to business success.
I've frequently argued to my organization's leadership that the product could be open source on GitHub with a flashing neon sign above it and it wouldn't change anything about the business. A competitor stealing our codebase would probably be worse off than if they had done anything else. Conway's law and all that.
One of the odd things people do with tech is taking someone else's random projections at face value?
What does it mean to say "we were promised flying cars", or "every city would have micro-factories, that 3D printing would decentralize production"?
The people creating these narratives may a) truly believe it and tried to make it a reality, but failed b) never believed it at all, but failed anyway, c) or be somewhere else on this quadrant of belief vs actuality.
Why not just treat it as, "a prediction that went wrong". I suppose it's because a narrative of promise feels like a promise, and people don't like being lied to.
It's a strange narrative maneuver we keep doing with tech, which is more future-facing than most fields.
We do have flying cars, and we do have printers that print other printers, but both were some combination of really expensive/poor quality. Technically speaking, if you take it that most cities have 3D printers, most cities then do have micro factories, however that says nothing about general feasability...
Technology requires infrastructure and resources, and our infrastructure is strained and our resources are even more so... Until the costs become pocket change for the average person, technology will just remain generally unavailable.
> What does it mean to say "we were promised flying cars"...
I don't know about the other things you mentioned, but I think you have this in the wrong category. "We were promised flying cars" is one half of a construction contrasting utopian promises/hype with dystopian (or at lest underwhelming) outcomes. I think the most common version is:
> They promised us flying cars, instead we got 140 characters.
Translation: tech promised awesome things that would make our life better, but instead we actually got was stuff like the toxicity of social media.
IMHO, this insight is one of the reasons there's so much negativity around AI. People have been around the block enough to have good reason to question tech hype, and they're expecting the next thing to turn out as badly as social media did.
> It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it?
There was a point of time where some people looked at 3d printers and said "Wow, imagine how great this technology will be in 20 years." There was some amount of anticipation for multi-material printers to come around and for home printers to begin replacing traditional consumer goods. Compared to crypto, vr, and ai it doesn't look like much but 3d printing did go through a hype bubble.
> It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it?
It's really hard to beat injection molding for scale.
However, what 3D printing did shift was building molds and prototypes. And that shifted small volume manufacturing--one offs and small volumes are now practical that didn't used to be. In addition, you can iterate more easily over multiple versions.
The limiting factor, however, has always been the brain power designing the thing. YouTube is littered with videos that someone wants to build a "thing" and then spends 10-20 iterations figuring out everything they didn't know going into the project. This is no different from "real" projects, but your experienced engineering staff probably only take 5 iterations instead of 20.
3D printing is giving my company many benefits over injection molding. We have 6 variations of the case for our device and we're always coming up with improvements and new functionality, and new products. I only see us expanding our in-house resin print farm instead of building out injection molds. No, we aren't selling millions of units, but injection molding is just too expensive for anything but a 1-size-fits-all solution.
> I never heard that. It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it? Units per hour and dollars per unit was never its strength. It was always going to be small things (and if anything big grew out of it, those would naturally transition to the more efficient manufacturing at scale).
There were articles posted on HN hyping exactly that, with comments debating whether 3D-printing would eventually replace conventional manufacturing at scale, and how people would no longer shop at stores like Walmart for their cheap products.
Once the predictions of a magical future turn out to be false, techies suddenly don't remember. Kind of like when the cult leader's prediction of doomsday doesn't show, there's always another magical prediction of a new future coming. Here are just a few major mainstream sources:
2012, Cornell Prof and Lab Director, in CNN: "We really want to print a robot that will walk out of a printer. We have been able to print batteries and motors, but we haven’t been able to print the whole thing yet. I think in two or three years we’ll be able to do that." (https://www.cnn.com/2012/07/20/tech/3d-printing-manufacturin...)
2013, World Economic Forum: "the world can be altered further if home-based 3D printing becomes the norm. In this world, every home is equipped with a printer capable of making most of the products it needs. Supply chains that support the flow of products and parts to consumers will vanish, to be replaced by supply chains of raw material." (https://www.weforum.org/stories/2013/08/will-3d-printing-kil...)
2013, President of the United States of America Barack Obama hypes up 3-D printing in the State of the Union as a technology that will bring manufacturing back to the U.S.: “A once-shuttered warehouse is now a state-of-the art lab where new workers are mastering the 3-D printing that has the potential to revolutionize the way we make almost everything..." Obama announced plans for three more manufacturing hubs where businesses will partner with the departments of Defense and Energy “to turn regions left behind by globalization into global centers of high-tech jobs.” (https://edition.cnn.com/2013/02/13/tech/innovation/obama-3d-...)
2012, Cover story and special issue of The Economist predicting another Nth industrial revolution:
"THE first industrial revolution began in Britain in the late 18th century, with the mechanisation of the textile industry. Tasks previously done laboriously by hand in hundreds of weavers’ cottages were brought together in a single cotton mill, and the factory was born. The second industrial revolution came in the early 20th century, when Henry Ford mastered the moving assembly line and ushered in the age of mass production. The first two industrial revolutions made people richer and more urban. Now a third revolution is under way. Manufacturing is going digital. As this week’s special report argues, this could change not just business, but much else besides.
A number of remarkable technologies are converging: clever software, novel materials, more dexterous robots, new processes (notably three-dimensional printing) and a whole range of web-based services. The factory of the past was based on cranking out zillions of identical products: Ford famously said that car-buyers could have any colour they liked, as long as it was black. But the cost of producing much smaller batches of a wider variety, with each product tailored precisely to each customer’s whims, is falling. The factory of the future will focus on mass customisation—and may look more like those weavers’ cottages than Ford’s assembly line." (archive: https://communicateasia.wordpress.com/2012/04/20/manufacturi...)
At some scales, Obama was right... a lot of companies that do plastic extruded parts also do 3D printing for lower volume fulfillment. You can also do some types of parts that you couldn't make through extrusion.
It's especially funny because HN commenters are some of the most likely people to make wild, sweeping claims then once they don't come true, turn back around and say "well no one was actually saying that anyway."
Or I just realized that if they are a 22 year old college graduate, they were in elementary school when the 2012-2014 3-D printing hype cycle was at its peak.
> BTW, I think a lot of people were/are greatly overestimating the value of coding to business success.
I think I have a conversation at least weekly where I have to explain to someone that using an LLM to convert COBOL to Java (or whatever) will not actually save much effort. I don’t know how many ways to explain that translating the literal instructions from one language to another is not actually is not that hard for someone fluent in both and the actual bottleneck is in understanding what sort of business logic the COBOL has embedded in it and all the foundational rearchitecting that will involve.
> When you spend two years making useless Arduino projects, you develop instincts about electronics, materials, and design that you can’t get from a tutorial. When vibe coding goes straight to production, you lose that developmental space. The tool is powerful enough to produce real output before the person using it has developed real judgment.
The crux of the problem. The only way to truly know is to get your hands dirty. There are no shortcuts, only future liabilities.
Then again, sophisticated manufactured electronics had long been cheap and available by the time somebody thought to create Arduino as a platform in the first place.
And even today, people hack on assembly and ancient mainframe languages and demoscene demos and Atari ROMs and the like (mainly for fun but sometimes with the explicit intention of developing that flavor of judgment).
I predict with high confidence that not even Claude will stop tinkerers from tinkering.
All of our technical wizardry will become anachronistic eventually. Here I stand, Ozymandius, king of motorcycle repair, 16-bit assembly, and radio antennae bent by hand…
If you didn't catch it, this is a joke calling out the comment above it for using a couple obvious LLM-isms. The comment above may have been a joke, too. It's hard to tell any more.
"You're in a desert, walking along in the sand when all of a sudden you look down and see a tortoise. It's crawling toward you. You reach down and flip the tortoise over on its back. The tortoise lays on its back, its belly baking in the hot sun, beating its legs trying to turn itself over. But it can't. Not without your help. But you're not helping. Why is that?"
Tortoise have been observed righting other tortoise that have become stuck.
https://www.youtube.com/shorts/DZ57D608fiM (two tortoises helping a third)
this has a terrible voiceover but you get the idea
But crucially they used "--" and not "—" which means they're safe. Unless it's learning. I may still be peeved that my beloved em dash has been tainted. :(
The article addresses this by making the point that prototypes != production. Arduino is great for prototyping (authors opinion; I have limited experience) but not for production-level manufacturing.
LLMs are effectively (from this article's pov) the "Arduino of coding" but due to their nature, are being misunderstood/misrepresented as production-grade code printers when really they're just glorified MVP factories.
They don't have to be used this way (I use LLMs daily to generate a ton of code, but I do it as a guided, not autonomous process which yields wildly different results than a "vibed" approach), but they are because that's the extent of most people's ability (or desire) to understand them/their role/their future beyond the consensus and hype.
I think even calling them MVP factories is a bit much. They're demo factories. Minimum Viable Products shouldn't have glaring security vulnerabilities and blatant inefficiency, they just might me missing nice-to-have features.
I might be tilting at a strawman of your definition of vibe coding - apologies in advance if so.
But LLM-aided development is helping me get my hands dirty.
Last weekend, I encountered a bug in my Minecraft server. I run a small modded server for my kids and I to play on, and a contraption I was designing was doing something odd.
I pulled down the mod's codebase, the fabric-api codebase (one of the big modding APIs), and within an hour or so, I had diagnosed the bug and fixed it. Claude was essential in making this possible. Could I have potentially found the bug myself and fixed it? Almost certainly. Would I have bothered? Of course not. I'd have stuck a hopper between the mod block and the chest and just hacked it, and kept playing.
But, in the process of making this fix, and submitting the PR to fabric, I learned things that might make the next diagnosis or tweak that much easier.
Of course it took human judgment to find the bug, characterize it, test it in-game. And look! My first commit (basically fully written by Claude) took the wrong approach! [1]
Through the review process I learned that calling `toStack` wasn't the right approach, and that we should just add a `getMaxStackSize` to `ItemVariantImpl`. I got to read more of the codebase, I took the feedback on board, made a better commit (again, with Claude), and got the PR approved. [2]
They just merged the commit yesterday. Code that I wrote (or asked to have written, if we want to be picky) will end up on thousands of machines. Users will not encounter this issue. The Fabric team got a free bugfix. I learned things.
Now, again - is this a strawman of your point? Probably a little. It's not "vibe coding going straight to production." Review and discernment intervened to polish the commit, expertise of the Fabric devs was needed. Sending the original commit straight to "production" would have been less than ideal. (arguably better than leaving the bug unfixed, though!)
But having an LLM help doesn't have to mean that less understanding and instinct is built up. For this case, and for many other small things I've done, it just removed friction and schlep work that would otherwise have kept me from doing something useful.
The maker movement comparison is interesting but I think it breaks down in one key way: the marginal cost of software distribution is basically zero. 3D printing still requires physical materials and shipping. Vibe coded apps can reach users instantly if there's a discovery mechanism.
The real parallel might be the early web era where anyone could make a website but finding them required Yahoo directories and later Google. Right now vibe coded apps have the same discovery problem - they exist but there's no effective way to find or evaluate them.
Ok, i just generally disagree with the premise. Why does it have to be "100% vibe coded" or "0% vibe coded"? There is a very happy medium that is getting ignored here. As a coder with various language experiences, i can just get like a good kick and a template with Claude and continue in any language i want and have the LLM do the redundant parts. As someone with some soldering experience, i could have an LLM cook up and explain a circuit that might have taken me months trying to mangle myself. I think LLMs empower creativity more than ever, and creative people can have a wonderful time with LLMs softening the initial headbanging and tedious redundancies of any project.
Never has it been more exciting to be a builder (software)! So much momentum and so little getting blocked. I am learning faster than ever even with LLMs doing so much of the heavy lifting. It is so fast to iterate and just MAKE STUFF!!!
Did the maker movement end? I dont think so, its just as niche as its always been. We have plenty of maker type posts on here. I dont think “vibe” coding is going away. Especially with so many open source models you can run on a simple Mac.
It didn't end, it just failed to commercialize, which IMO is a better outcome anyway. Many more communities today have something akin to a maker space than before the movement. It succeeded to a point that it became mundane.
I think it stunted out. Outside of only the densest areas, maker spaces never really formed. The stuff remains accessible as a hobby only to the wealthy who can afford all these tools and machines in the majority of the country. I'm a nearly 40 minute drive to the closest maker space and I'm in one of the 10 densest populated cities in the country. The last city I lived in, the maker space was too popular and raised their fees so high that it is also impossibly inaccessible to most people.
I'm not trying to defend maker spaces, though they make more sense to me in a college setting. My college had (has?) one and one of our professors really made sure to always use it, and have students use it and learn. Immense value there, even if only a dozen or less use it every year, its still an avenue for inspiration.
I saw that happen in a decent sized college town near where I live. They had a maker space spring up when 3D printing was the hottest thing. It didn't last very long though. I'm a bit surprised that 3D printer machines haven't become cheaper. Like solid machines sub-$100. 3D printer pens are the only thing that came close to doing that.
They're already very cheap, almost free when you buy used. I got one for $50 that makes pretty good prints. For $300 you can buy an Elegoo Centauri Carbon that is a really high end consumer printer. Don't forget that we're talking about CNC machine tools with precision movements here. An entry level manual milling machine from Precision Matthews in Taiwan will cost you $250 shipping alone. Even good linear rails by themselves are more than $300 on ebay. A lot of innovation has been happening in the 3D printer space to make all these machine components cheaper which has also benefited other applications like hobbyist milling.
Nowadays, we are so used to all the injection molded plastic crap, and also so much poorer, that we can't understand why precisely manufactured products made from solid metal or wood are so expensive.
You can get 3D printers from BestBuy(!) for $200 retail. At that point, the cost of the filament is going to quickly exceed the cost of the machine.
At the $200 price point, your Bill of Materials is roughly $65 (about 1/3 of the retail cost). I challenge you to buy the raw materials of a 3D printer for under $100 let alone $65.
To me the maker movement is alive as ever. Sure the arduino has died a death, but pico, esp32 and various other microcontrollers evolved the entire system, and with wifi too.
The author of this article gives a more balanced POV than mine. I think most (maybe overwhelming majority) of publicized vibe coding projects are complete technical virtue signaling.
With agentic loops, you specify what you want and it continues to do stuff until ‘it works’. Then publish. Its takes less time and attention. So projects are less thought out and less tested as well.
In the end, I think it’s not about how a project was created. But how much passion and dedication went into it. It’s just that the bar got lowered.
Every market on some level can be analogized to a common and simple market.
One of the common examples in management books is the signage industry. You can have custom logos custom molded, extruded, embossed, carved, or at least printed onto a large, professional-looking billboard or marquee size sign. You can have a video billboard. You can have a vacuum formed plastic sign rotating on top of a pole. At the end of the day, though, your barrier to entry is a teenager with a piece of posterboard and some felt-tipped markers.
What has happened is that as the coding part has become easier, the barrier to entry has lowered. There are still parts of the market for the bespoke code running in as little memory and as few CPU cycles as possible, with the QA needed for life-critical reliability. There’s business-critical code. There’s code reliable enough for amusement. But the bottom of the market keeps moving lower. As that happens, people with less skill and less dedication can make something temporary or utilitarian, but it’s not going to compete where people have the budget to do it the higher-quality way.
How much an LLM or any other sort of agent helps at the higher ends of the market is the only open question. The bottom of the market will almost certainly be coded with very little skilled human input.
I think it's often genuine excitement to share a thing - without quite processing that anybody with the same idea can now build it (for simple- to mid-complexity projects).
The novelty of "new thing! That would have been incredibly hard a decade ago!" hasn't worn off yet.
This isn't the first time something like this has happened.
I would imagine that people had similar thoughts about the first photographs, when previously the only way to capture an image of something was via painting or woodcutting.
When movies first came out they would film random stuff because it was cool to see a train moving directly at you. The novelty didn't wear off for years.
There was something someone said in a comment here, years and years ago (pre AI), which has stuck with me.
Paraphrased, "There's basically no business in the Western world that wouldn't come out ahead with a competent software engineer working for $15 an hour".
Once agents, or now claws I guess, get another year of development under them they will be everywhere. People will have the novelty of "make me a website. Make it look like this. Make it so the customer gets notifications based on X Y and Z. Use my security cam footage to track the customer's object to give them status updates." And so on.
AI may or may not push the frontier of knowledge, TBD, but what it will absolutely do is pull up the baseline floor for everybody to a higher level of technical implementation.
And the explosion in software produced with AI by lay-people will mean that those with offensive security skills, who can crack and exploit software systems, will have incredible power over others.
I believe the security vulnerability issues will be addressed with companies using cloud based vibe-code platform or a ai security auditor agent that runs through the code base and flags security issues.
Sure it is. AI software development is here. It's not good enough for everything, but it's good enough for a majority of the changes made by most software engineers.
That's now. Right now, the tooling exists so that for >80% of software devs, 80% of the code they produce could be created by AI rather than by hand.
You can always find some person saying that it'll destroy all jobs in a year, or make us all rich in a year, or whatever, but your cynicism blinds you to the actual advances being made. There is an endless supply of new goalpost positions, they will never all be met, and an endless supply of chartalans claiming unrealistic futures. Don't confuse that with "and therefore results do not exist".
No, it isn't. There is a gigantic chasm of difference between "80% of code they produce could be created by AI" and "80% of commits they produce could be created by AI".
Mixing the two up is how we get a massive company like Microsoft to continually produce such atrocious software updates that destroy hardware or cause BSODs for their flagship Operating System.
That's not replacing software development. That's dysfunction masquerading as capability.
And none of what I said is goalpost moving. They are the goalposts constantly made by the AI industry and their hype-men. The very premise of replacing a significant amount of human labor underlies the exorbitant valuation AI has been given in the market.
It appears that your understanding of AI code generation reflects the state of 1-2 years ago. In which case of course it seems like what people are describing as reality, feels 1-2 years away.
> There is a gigantic chasm of difference between "80% of code they produce could be created by AI" and "80% of commits they produce could be created by AI".
This is exactly the goalpost moving I am talking about. I said 80% of code could be AI-written, you agreed, and followed up with "oh but it doesn't matter because now we're measuring by % of commits".
Today I fed to Opus 4.6 five screenshots with annotations from the client and told it to implement the changes. Then told it to generate real specs, which it did. I never even looked at the screenshots, I just checked and tested against the generated specs. Client was happy.
I have a similar feeling to people who upload their AI art to sites like danbooru. Like I guess I can understand making it for yourself but why do you think others want to see it
xkcd turned stick figure drawings into an art form. sometimes it is not about how something was created, but about the story being told.
some people build apps to solve a problem. why should they not share how they solved that problem?
i have written a blog post about a one line command that solves an interesting problem for me. for any experienced sysadmin that's just like a finger painting.
do we really need to argue if i should have written that post or not?
Even if status-signaling through this vector loses it's lustre, AI slop (agentic or otherwise) will not, and some of that slop will take on the guise of "vibe-coding" projects.
What's new is this concept of the "maker movement" as a distinct counterculture. It's relatively easy to go buy parts and materials and make things. People 30 or 40 years ago who built stuff instead of buying it didn't really identify as anything because that was just what you did when you wanted something. Whereas nowadays you can buy pretty much anything on Amazon, even things that are fit for a very specific purpose.
For example, if you wanted a pretty dress with a specific fabric and cut, you would likely have had to sew it yourself or pay a tailor because your off-the-rack options would be limited, costly, or ill-fitting. But people just did that without fanfare and it wasn't a counterculture. Or if you wanted custom cabinets or resin-coated live-edge stair treads, etc. You'd just figure out how to make it if you wanted it. Or you could pay someone else to do it.
I think the severity of this is wildly overblown in an effort to make it fit the thesis.
Like… if the maker thing was less of an insane cult that died out than genuine excitement about things that actually did matter… well the whole thing falls apart.
We’re just not required to accept the (false, I think) premise this depends on, even if we’re inclined to agree with what it says about vibecoding.
Yeah, I have no idea what this guy is talking about. I still get Make magazine full of people making projects every month. My youtube feed is similarly full of people making stuff and sharing it with the community.
Check out the Maker Project Lab weekly video showcasing awesome stuff from the maker community, it's inspiring and fun to see. https://www.youtube.com/@MakerProjectLab
The hype cycle of 3D printers has probably plateaued into productivity now. Certainly the Maker movement is alive and well but it's not the hot new thing like it was a decade or a dozen years ago. Makerspaces aren't sprouting like mushrooms like they were before (partly because critical mass was already reached, partly because the pandemic reduction of physicality I'd guess), you don't see gimmicky 3D-printing kiosks at the mall anymore.
For people that have been doing something for some time, it's kind of funny when their old thing becomes new. Old things are now suddenly becoming internet famous and starts trending, so it suddenly becomes "new". Eventually, those new comers that only came along as trend followers fall away. That leaves the OG people plus some of the new comers that will stick around. Eventually, a new generation will discover it and it becomes "new" in whatever circles they run.
Plenty of people fall in both camps of DIY and vibe coding. Just last week I used codex to write me so great scad file so that I now have a token generator for my multi color 3d printer. Vibe Coding can allow makers to go further quicker.
Making isn't dead, but the movement is. There is no longer a large gap of people who are gaining interested in it but who haven't yet figured out how to get started. Now, everyone who wants to make it is already doing it.
I feel like the "maker movement" was more a corporate effort to commoditize tools and supplies to sell to makers. Not to mention selling the lifestyle of "maker".
If you see it through a cynical capitalist lens you could argue the maker movement is just an engineered market segment, how many people bought raspberry pis, arduino, 3d printers and barely use them? Do they actually make things or do they watch videos of influencers making things and selling them the dream (and tools)
I disagree with too much philosophizing around both Makers and vibe coding. The actual incentives are curiosity and a desire to build what one cannot buy (and using that for teaching initiative in kids) - not AGI or transforming society.
Physical making is hard: you run up against the limits of plastic or the difficulty of cnc planning for various materials, as well as the limited value for small projects: people rarely make entire projects, instead making parts. So there is an upper bound for the utility of making. (btw, anyone have a laser welder or steel-capable CNC's they're tired of?)
Software making is what you make it, subject to the laws of complexity, and as valuable as its integration (computers, robotics). These in theory are limiting, but in practice there are effectively an infinite supply of valuable projects when the cost of production reduces. Deployments will be limited by access to customers, which is not a problem when people make software for themselves.
I don't understand this. I use agentic coding to do things more quickly. And it's not just toys. I end up with software that both works and is useful. Assuming AI models powerful enough to drive that process continue to be available, why would I stop doing it?
Th is isn't discussing individuals, it's discussing trends as a whole. There are still plenty of makers getting value out of 3d printers as well, but it's not everyone like we talk about everyone becoming a software developer with vibe coding.
The author writes as if he didn't know 'aider' even existed. "Vibe coding skipped that phase entirely" is dead wrong. What may be different is that the cycle was incredibly short before Anthropic made it mainstream with Claude Code. Gemini CLI, definitely a Claude Code imitator, existed long before The New York Times knew what Claude Code was. Openclaw -- a decidedly different agentic AI application -- is part of another period where weirdos are playing with tools.
I have a feeling that the maker movement specific being talked here was with meetups for showcasing things (fairs?) and with local hackerspaces at the age of the makerbot as the “game changer” 3D printer. If that is the case that one was captured by corporations - and for makerbot, the Stratasys “takeover”. I guess the AI/vibe coding was born from corporations but with local models there is this promise to move it to easier/more open access. I feel it’s too soon to tell to trace part of the parallels. I also feel the Maker movement cited was at a better age for Blogs, so lots of the vibe coding may just be happening without an audience.
The failure mode split nobody's naming: Claude gets regexes right about 95% of the time, which is annoying but catchable. Gets auth logic or state management right 95% of the time and you've got silent data corruption showing up 3 months later on an edge case nobody tested.
Vibe coders treating those as the same category is what actually worries me. Even in regular software there's a feedback mechanism - unit tests go red, CI breaks. Vibe coding skips that too. You get working code that passes the happy path and nothing that tells you which 5% failure rate is the dangerous one. That judgment about problem category severity is the thing that's hard to develop without breaking things first.
Participating in the maker movement achieved a few things: it signalled you had intellectual curiosity, that you were a man who could do things with his hands, and that you fixed things, rather than bought new - thereby increasing your green credentials.
Ditto. I have done 6 projects over the last 12 months, and wrote up 3 of them on my web site, I also usually post a link either here, or hackaday, or the other maker sites, most of my work these days is repurposing broken commercial or consumer electronics by replacing the PCB's to give things a second life (eg <https://rodyne.com/?p=3380>). I've been making things since 1981, vibe coding just makes it easier for me to work with more complicated stuff.
To be clear I’m not sure what I’m doing is vibe coding because I write some of the code and read/understand what the LLM writes.
I think I’m learning less (about the code) but making more. Maybe that’s okay? There are other things to learn about. My code has users, it processes money. I user test, I iterate, I see what works and what they need.
Yeah, the term "vibe coding" is really overloaded these days. I, too, make detailed plans for the LLM, but that's just what works for me, I don't care enough to give it an exact name. I'm having fun, and that's what counts.
There was also something subtle that happened, and it seemed to happen quite rapidly, a little over a decade ago. "Maker" started being used to mean more than just 3D printing hackers and started to refer to engineers, and then others "making" things.. but the watering down wasn't the end of it, it became a way to praise a certain class of employee. The resentment that generated (say, sales, marketing, etc) and the bizarre uses of "Maker", I believe contributed to it's demise.
No. AI assisted coding ("vibe coding") will not go away, but the hype around it will as it becomes incorporated into development like any other tool. You'll be expected to use it at work (for "productivity" reasons), but if you enjoy the act of coding and problem solving, you still won't have to for personal projects.
Nah. The most universal rule of human nature is humans be lazy. Makers do extra effort for no real gain. Vibe coders do less effort for more gain. Vibe coding is what everyone wanted computers to be from the beginning. Tell it what to do, it does it.
Actually, the future isn't vibe coding, it's vibe agenting. GPT 5.3 is so advanced, you don't need to write a program to do something. You tell the agent what you want, and it does it for you by "using" desktop apps like a person. If it can't do it manually, it'll write a program to do it. That's where we're headed.
At the same time, the quality of all this is absolute dogshit poor, so the market for things that actually work properly is probably still there. Which CEO recently had OpenClaw delete all their mail?
The maker movement is not dead but it's a far more niche audience. Don't get me wrong, get a 3d printer and an arduino(or arduino like equivalent), endure a week of suffering and you are hooked for life: this was my own experience and anyone that I know that has ever gone down that road. ~~vibe~~ Slop coding won't die either but there are a lot of people will get a cold shower sooner or later: some already have. All ai slop is a russian roulette where the players may not even know they are playing and the gun is a backwards revolver. I can't say whether slop coding will professionally die before or after the burst of the AI bubble, but everyone is starting to realize that slop is unmaintainable, inefficient and full of bugs when you factor in all the edge cases no slop machine will ever cover. AI can exist in non-professional spaces and hobby projects, though I'd argue it may be equally as dangerous for the people that use it and those around them: you are only one firewall-cmd away from leaking all your personal data.
As for the parallels with the maker movements, here's one example: drones are one of my hobbies. I love drones and I've built countless fpv ones. For anyone that hasn't done that, the main thing to know is that no two self-build drones are the same - custom 3d printed parts, tweaks, tons of fiddling about. The main difference is that while I am self-taught when it comes to drones, I have some decent knowledge in physics, I understand the implications of building a drone and what could go wrong: you won't see me flying any of my drones in the city - you may find me in some remote, secluded area, sure. The point is I am taking precautions to make sure that when I eventually crash my drone(not IF but WHEN), it will be in a tree 10km from anything that breathes. Slop code is something you live with and there are infinite ways to f-up. And way too many people are living in denial.
The comparison feels off to me. The Maker Movement was an actual movement with a shared ideology of self-transformation through building. People identified with it. Vibe coding is just a description of a practice.
The term covers a broad range of people: developers building components in languages they don't know, people trying to ship something fast and cash out, enthusiasts, and plenty of developers who are just too lazy to do their job. Any generalizations about what this "means for society" are going to be strained by definition.
The author partially senses this. He writes that vibe coding "skipped the scenius phase" but misses why. I think there was no scenius phase because there was no movement in the first place. The tool just became available to everyone at once.
Vibe coding isn't so much a movement as a big fat tool that was air dropped from space after the megacorps decided to dump billions of dollars into LLMs and LLM companies.
It's like comparing Christianity to water wheels or gay pride to to the Saturn V rocket. It's just not really analogous in any way.
I do agree with the author about commoditization, however.
The most likely outcome is that software will be commoditized and software developers commoditized even harder. If we still need software engineers to prompt, you'll find plenty of people in India able to do those tasks, not necessarily with great quality until they too are replaced by better AI.
This whole situation inspired me to actually dive harder into Maker type stuff such as learning how to design PCBs, but one thing I found is that this TOO is very close to being automated by AI. To actually get hardware made, even prototyping PCBs, you NEED to go to China, and the Trump tariffs cut into the cost of doing these activities hard.
Circuit design has been on the cusp of being automated ever since there were computers. It's been over twenty years of autolayout tools and they're still not very good.
Maybe you could research how to make your own PCBs? It can be done at home with a little equipment and then you can offer it as a service to others.
The thing is, the cost of making them at home is both laborious, poorly reproducible, and lower quality than getting it done at JLPCB. In the old days, it was done with an exacto and rubylith. Today it requires a laser setup for about $4000 and you still need to manually apply and remove a resin layer. It's mostly not worth it to do things this way, and you lose the ability to have more than 2 layers in your board.
The bigger issue with PCBs is that even with a nice prototype, actual manufacturing needs to be done in Shenzen for any sort of cost competitiveness if you want to step outside of the hobby realm (just as the author of this essay stated).
It's really, really hard to see where the USA stands in the value chain any more once LLMs have been deployed. If all the physical manufacturing lives in China, where the manufacturing supply chain also lives, and Chinese AI companies can very very easily distill US LLM models, the two remaining US advantages is actually just the dollar's role as reserve currency --- something that crypto bros and the US president is working on eroding at a record pace, and the fact that this overvalued dollar gets all the smart people in China and India to emigrate to the US -- also becoming politically less viable.
The outsource-prompting-to-India stage will almost entirely be skipped (it already has been).
Developing nations that were looking to tech to climb the economic ladder, are watching that ladder be pulled up.
Most of the upside will go to the US and China. Europe is lagging shockingly on AI spend, they're extremely far behind (but with constant plan announcements). If you didn't know any better, you'd think Europe believed the year was 2010.
Hard disagree with this take. Mass adoption of any technology is almost always a good thing; the more people are looking at the sane problem, the more clever/elegant/innovative solutions come out of it.
Im also not sure if “vibe coding” did not have a phase where early adopters were mucking around? I saw the early versions of gpt much earlier than chatgpt and a lot of folks were using transformers for coding before claude.
The title of the linked article is "Vibe Coding and the Maker Movement" but the title on Hacker News is "Will vibe coding end like the maker movement?" - I think the original title should be restored.
I wasn’t aware the maker movement ended. There are all sorts of cool things we can do with on-device ML that have major privacy and convenience benefits over Claude in the cloud. In fact with hardware improvements I think integrated intelligence will be heating up.
The 3D printer hype bubble wasn't as big as the current AI bubble, I'd even characterize it by enthusiasm rather than call it a hype. However, 3D printers have come a long way, they've become commoditized and affordable. More and more people jump in all the time and the maker movement continues, the niche is growing at a steay rate. I'd be curious to see how this evolves in the next 5 to 10 years.
edit: I read this title wrong, thought it said "end the maker movement"
personally I enjoy creation and writing code so I'm not going to vibe code my hobby/passion project, I don't care if theoretically it'll save me x amount of time, the code is rote for me anyway but I have to be actively engaged in it to enjoy it
News to me. denhac has grown from 500 members to 600 in the last year since I joined. The space is constantly evolving and they'll be moving to a another larger location (again).
3D printing does bear some similarity to vibe coding/LLM-generated code. I do occasionally see "product" 3D printed items but the bigger value-add for 3D printing has been rapid prototyping and then running that design through actual production testing.
An example 3D workflow:
Prototype design -> 3D print -> test/break -> production design -> real manufacturing process
The equivalent vibe code
Vibecobe -> slop -> test/break -> real developers -> real development process
--
The real test for vibe coded stuff (much like 3D printed crap at craft fairs) will be if someone actually buys it. But much like those 'makers', vibe coders will have to go through the "real development process" if they want to make money at scale.
> and it has to do with how the Maker Movement actually ended.
> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
This version of the Maker Movement only ever existed in news articles and hype bubbles.
The Maker Movement was never about building small factories and consumer 3D printing was never about manufacturing things at scale. Everyone who was into 3D printing knew that we weren't going to be 3D printing all of our plastic parts at home because the limitations of FDM printing are obvious to anyone who has used one. At the time, consumer 3D printers were rare so journalists were extrapolating from what they saw and imagined a line going up and to the right until they could produce anything you wanted in your home.
The Maker Movement where people play with Raspberry Pi, Arduino, and cheap 3D printers is possibly stronger than ever. Everything is so cheap and accessible now. 10 years ago getting a 3D printer to produce parts was a chore that required a lot of knowledge and time. Now for a couple hundred dollars anyone can have a 3D printer at home that is mostly user friendly and lets them focus on printing things.
The real version of the Maker Movement just isn't that interesting to mainstream because, well, it's a bunch of geeks doing geeky things. There's also sadly a lot of unnecessary infighting and drama that occurs in maker-related companies, like the never ending Arduino company drama, the recent Teensy drama that goes back years, or the way some people choose their 3D printer supplier as their personal identity would rather argue about them online than print.
>> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
> This version of the Maker Movement only ever existed in news articles and hype bubbles.
That version of the Maker Movement was heavily pushed by city and the state government in Massachusetts. They put money into it; foundations funded it.
It was seen as a way to give students another pathway for those who weren't interested in going to college. I've seen first hand how some kids who weren't interested school or academics really got into the Maker thing, which got them into STEM.
Some of them ended up going to college to study engineering and related fields. Some of them ended up working in related fields and started their own businesses.
As time went on, it became clear to me that the Maker Movement wasn’t going to go mainstream, although 3D printing has found another niche audience recently in the home lab space. Many home-labbers on YouTube 3D print their own cases and other parts.
There will be normies that take up vibe coding like some knit their own sweaters or grow their own food because they enjoy it.
And there will be Fortune 500 companies that will vibe code certain products.
This misses the point that AI is not just vibe coding, but the same opus 4.6 is also exceptionally good at idea generation, content generation, research etc etc.
It is not just vibe coding that is being developed, but general intellegence.
These promotional articles get more refined: They start with the negatives and then refute them in the last paragraphs.
None of these sophisticated articles mention that you could already steal open source with the press of a button before LLMs. The theft has just been automated with what vibe coders think is plausible deniability.
The maker movement directly helped bring about AI. Likely every top OpenAi engineer did a blinky project with Arduino that helped them improve their general problem solving skills.
The "Maker" movement and "vibe coding" have changed the way I do things. I 3D print several things a month, and now I make PC boards with KiCad, etc. It's an incremental change, but a change nonetheless
right now I think there's just a backlog of things to build
from individual tinkerers and ideas guys cranking out all the projects they would have never subsidized, there's a lot of that
and with corporations I'm seeing there are lots of products that would have taken 8 quarters to do, all being compressed into one now. The flip side is that all 8 quarters wouldn't have been allowed to happen as priorities would have shifted before the product or feature roadmap was ever allowed to get that far, but instead now all of it is being built out and other iterations and directions are being done simultaenously
after all of this is shown not to be saving money, or creating much value because they're doing too much without market validation, then a more intelligent approach will occur and less vibe coding will occur
A mix of perspectives in here that feel inter-related. The maker movement state-side leaned more "fun or artsy" while the real maker movement you could argue was thriving in China. Another darker way of looking at it is: if the maker movement was really believed to be a way to bring manufacturing back, it was effectively cargo-culting that by focusing only on a narrow set of building blocks. Maybe it's similar to building your own PC from parts at Fry's back at the day: that felt good... and you did feel you were really making something. But you were really doing final assembly and abstracting out the complexity of building those building blocks that went into it.
Anyway I think we are seeing a scenius phase -- it's just happening everywhere all at once on a world stage. And it's exciting. As with any moment in time there's a ton of experimentation and a small number of break-out hits. Also the pace of change means there's less staying power for a break-out hit than there used to be.
But the quick break-out hit phenomenon is particularly applicable for things that are more about the attention economy and less about the boring hidden things that traditionally have been where the economy's silent toil is really centered.
All of this makes me feel the author is too close to the creative end-consumer layer e.g. "make something flashy and cool whether it's a 3d-printer in a 5th avenue dept. store window, or a new app front end" but perhaps less focused on the full depth of things that really exist around them.
This really resonates with me in that a lot of NYC's "tech" circa 2013 was 3d printing oriented, much more so than in Silicon Valley. And I wondered why? but then it was a reflection that tech in NYC then was more about marketing, story telling, and less about the depth...
Obviously you had the west coast makers, you had the burners, so I don't mean to conflate all these differnet things. But the idea that Maker Faires were really about bringing manufacturing back... I don't know I think it was more about the counterculture, about having fun. I think that's coming back to tech right now as well in a sense. Even if it's also got dystopian overtones
> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
There are plenty of products now that only exist because of what it did deliver on. Any one who spends time in the niche communities where it is thriving can see that... On the low end look at Apollo automation, the story of Grismo Knives, at the high end look a Hadrian Manufacturing.
Vibe coding is a terrible name, but what a skilled dev can do with a deeply integrated AI coding assistant is amazing. It changes the calculus of "Is it worth your time" (see: https://xkcd.com/1205/ ).
Is it helpful in my day to day: it sure is. Is it far more helpful in doing all the things that have been on the back burner for YEARS? My gods yes! But none of that is matching the hype thats out there around "vibe coding".
My general take on most vibe coding projects ("Hey, look, I built this over the weekend"), is general dismissiveness. Mostly because of the effort required, i.e. why should I care about something that someone did with almost zero effort, a few prompts?
If someone tells me they ran a marathon, I'm impressed because I know that took work. If someone tells me they jogged 100 meters, I don't care at all (unless they were previously crippled or morbidly obese etc.).
I think there are just a ton of none-engineers who are super hyped right now that they built something/anything, but don't have any internal benchmark or calibration about what is actually "good" or "impressive" when it comes to software, since they never built anything before, with AI or otherwise.
Even roughly a year ago, I made a 3D shooting game over an evening using Claude and never bothered sharing it because it seemed like pure slop and far too easy to brag about. Now my bar for being "impressed" by software is incredibly high, knowing you can few shot almost anything imaginable in a few hours.
I struggle with this feeling as well, a huge part of the Maker movement was excitement around people building and importantly learning how to build thing. Iterating and improving each time is a pretty common thread you'll see throughout the community. It's hard to have someone show you a thing they generated instead of made and to feel the same way. Yes, they played a part in that thing existing, and part of that person is reflected in the output, but I don't think most Makers would say the final output is goal, so what's there to be excited about?
It's hard to not be dismissive or gate-keeping with this stuff, my goal isn't to discourage anyone or to fight against the lower barriers to entry, but it's simply a different thing when someone prompts a private AI model to make a thing in an hour.
Why share something that anyone can just “prompt into existence”?
Architecture wise and also just from a code quality perspective I have yet to encounter AI generated code that passes my quality bar.
Vibe coding is great for a PoC but we usually do a full rewrite until it’s production ready.
————
Might be a hot take, but I don’t think people who can’t code should ship or publish code. They should learn to do it and AI can be a resource on the way.. but you should understand the code you “produce”. In the end it’s yours, not the AIs code.
Do people build to impress with an implementation that no one cares about really? Or to share the end product?
I think now you are freed up to make a shooter that people will actually want to play. Or at least attempt it.
We probably need to come to terms with the idea that no one cares about those details. Really, 2 years ago no one would have cared about your hand crafted 3d shooter either I think.
It doesn't matter, neither of those scenarios makes the effort impressive in this case. The vibe coded thing might even be useful - that does not make it impressive though. Effort does.
> The vibe coded thing might even be useful - that does not make it impressive though.
Then "impressive" shouldn't even be the benchmark. If someone gifted me $10K, I'm not going to care if they earned it in a competition or won it in a lottery. Value is value. I'm gratefully accepting it and not being snobby about it. I couldn't care less about how "impressive" anything is if it's useful to me.
This is what I think a lot of the people who advocate for 'AI generated images being art' don't get. There's no effort or intentionality into what's being created; it has the look and appearance of 'polished art' (that breaks down when you look closer) but behind it is nothing.
It's also why AI generated code is a nightmare to read and deal with, because the intention behind the code does not exist. Code outputting malformed input because it was a requirement two years ago, a developer throwing in a quick hack to fix a problem, these are things you can divine and figure out from everything else.
> I think now you are freed up to make a shooter that people will actually want to play. Or at least attempt it.
Taking this to an extreme, let's say vibe coding becomes real enough, and frictionless enough, that you can prompt a first person shooter into existence in a few minutes or hours.
If/when this becomes true, nobody will want to play your shooter. You'll share your shooter with people and if they care at all about shooters, they'll just go prompt their favorite AI tool and conjure their own into existence.
Admittedly this is a bit extreme, and we aren't there yet. But I've thought about this in relation to art, and how some people now go "well, this empowers people who didn't know how to make a movie/cartoon/painting/game, it's empowering and democratizing". But in my mind, art is a form of communication between humans. Without the exchange between humans, art cannot exist. If all of us are each lost in our own AI-powered projects, and if anything can be easily conjured out of thin air, then why bother with the next person's art project (game or whatever)? I don't care about your game, let me make my own in a few minutes.
I'm thinking about potential counterpoints: ah, yes, but it's about "ideas". While we can both make our ideas reality, my ideas are more inventive, so my AI-powered projects are more appealing. I'm not convinced about this; I think slop will dominate and invade public spaces, but also... why draw the line at ideas? Why is "skill with a pencil" replaceable with AI-slop, but ideas aren't? Ideas are often overrated, what matters is execution, anyway.
Quick answer: No.
Long answer: its the opposite; as an example, can use claude code to generate, build and debug ESP32 code for a given purpose; suddenly everyone can build smart gizmos without having to learn c/c++ and having knowledge of a ton of libraries.
I have Arduino and raspberry Pi boards. I am perfectly capable of hand writing code that runs on these machines. But they are sitting in the drawer gathering dust, because I don't have a use case -- everything I could possibly do with them is either not actually useful on a daily basis, or there are much better & reliable solutions for the actual issue. I literally spent hours going through other people's projects (most of which are very trivial), and decided that I have better things to do with my time. Lots and lots of people have the same issue.
And Claude Code is not going to change a single bit of that.
So, because you don't see value in it, you assume its the same for everyone. Got it.
Also, its not about if there are better or more reliable options; that's the opposite of the maker mentality - you do it because it is useful, it is fun or just because you enjoy doing it.
Such as designing some light fixture, printing it, and illuminating it with an esp32 and some ws2812 leds. Yah you could spend an afternoon coding color transitions. Or use claude code for that.
I think the reality is that the maker movement slowed down not because it’s hard to learn c++ but because people don’t care enough. Will maybe twice as many people participate now? Sure. But that’ll still be a small fraction of people.
I don't think it has slowed down; in fact,I think it has grown in the last few years. Sure, it is a niche - and will probably always be - but one never had such a low barrier of entry to build stuff and be creative; you have plenty of very powerful chips, somewhat usable SDKs, a ton of COTS ready to use components ranging from gps sensors to rotary encoders, and you can design your own pcbs and order them cheap from China; you can also design enclosures and 3d print parts in your own home with precision that was only accessible to specialized companies 15 years ago. LLMs are a great help not only on the code generation part, but also on the design part - as an example, I sometimes use ChatGPT to generate openscad functions, and it isn't half-bad.
I'd take vibecoded iot code any day vs the typical hot mess of poorly written code by non-experts following online tutorials and the casual stackoverflow copy-paste :)
Not sure I see it like that. Micropython removes most of the rough edges of doing embedded C.
If you prefer no code then I suggest ESPHome for your ESP IoT projects.
The other day I built a quick PoC to control 1024 rgb leds using RMT (esp32) and a custom protocol I was developing. Im pretty sure micropython would suck for that.
The other day I also developed a RGB-RGBW converter using a rp2040; claude did most of the assembly, so instead of taking a couple of days, it took a couple of hours.
I don't prefer no code; my point is software is a barrier on embedded systems, and if I - someone who can actually program in c/c++, python and assembly, see huge benefits in using LLMs, for someone at an entry level it is a life changer.
if youre using a pico, you can use PIO to have a bit more power. (I use it to control stepper motors with a smooth accel/decel ramp. Its doable with RMT, but not as easy.
Sure, and if it didn't is not complicated to add a new module. Thing is, the module does not support DMA. So, for the specific use case I gave, its not a good fit.
The maker movement comparison cuts both ways. What killed most Arduino projects wasn't skill gaps -- it was the cost of production at scale. The LED blinks fine; shipping 10k units breaks you. That constraint forced real learning.
Vibe coding skips that floor entirely. Software "just works" until it doesn't, and the failure mode is invisible until it's customer-facing. Hardware at least tells you when something is wrong because it sparks or stops blinking.
That said: the maker movement didn't die. It got serious -- RISC-V, open silicon, edge inference. The people who started with Arduinos are now doing real work.
My bet is vibe coding has the same trajectory. The floor failure will just be more catastrophic when it comes, because software doesn't spark.
The irony of this ai generated comment replying in defense of ai coding on hackernews. This entire vicchenai account has used llms to generate its entire comment history. What is the benefit to the owner of the account? What do they get out of this?
> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
I never heard that. It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it? Units per hour and dollars per unit was never its strength. It was always going to be small things (and if anything big grew out of it, those would naturally transition to the more efficient manufacturing at scale).
Vibe coding, on the other hand, is competing against hand coding, and for many use cases is considerably more efficient. It’s clearly replacing a lot of hand coding.
BTW, I think a lot of people were/are greatly overestimating the value of coding to business success. It’s fungible from a macro perspective, so isn’t a moat by itself. There’s certainly a cost, but hardly the only one if you’re trying to be the next big startup (for that, the high cost of coding was useful — something to deter potential competitors; you’ll have to make up the difference in some other way now).
Also, software is something that already scaled really well in the way businesses need it to — code written once, whether by human or LLM, can be executed billions of times for almost nothing. Companies will be happy to have a way to press down the budget of a cost center, but the delta won’t make or break that many businesses.
As always, the people selling pick-axes during the gold rush will probably do the best.
I think volume and cost was never really the issue. Even if 3D printing something was 3x the cost it could justify itself just by the sheer amount of overhead it can otherwise remove. Ultimately what limits 3D printing is what you can make with it, and the fact that it doesn't remove assembly as a manufacturing step. If you could 3D print full products then I think the promised revolution would have happened. (As it stands 3D printing has already had a massive impact on manufacturing. More stuff than you would think is 3D printed now, it's just not complete consumer items)
> BTW, I think a lot of people were/are greatly overestimating the value of coding to business success.
Fully agree - We already saw dev prices drop significantly when offshore dev shops spun up. I've had great, and also horrible experiences working with devs that could produce lines of code at a fraction of the price of any senior type dev.
The higher paid engineers i've worked with are always worth their salary/hourly rate because of the way they approach problems and the solutions they come up with.
Agents are great at building out features, i'm not so sure about complex software that grows over time. Unless you know the right questions to ask, the agent misses alot. 80/20 doesn't work for systems that need 100% reliability.
> The higher paid engineers i've worked with are always worth their salary/hourly rate because of the way they approach problems and the solutions they come up with.
I'm honestly just happy at the moment, because our two junior admins/platform engineers have made some really good points to me in preparation for their annual reviews.
One now completed his own bigger terraform project, with the great praise of "That looks super easy to maintain and use" from the other more experienced engineers. He figured: "It's weird, you actually end up thinking and poking at a problem for a week or two, and then it actually folds into a very small amount of code. And sure, Copilot helped a bit with some boilerplate, but that was only after figuring out how to structure and hold it".
The other is working on getting a grip on running the big temperamental beast called PostgreSQL. She was recently a bit frustrated. "How can it be so hard to configure a simple number! It's so easy to set it in ansible and roll it out, but to find the right value, you gotta search the entire universe from top to bottom and then the answer is <maybe>. AAaah I gotta yell at a team". She's on a good way to become a great DBA.
> Agents are great at building out features, i'm not so sure about complex software that grows over time. Unless you know the right questions to ask, the agent misses alot. 80/20 doesn't work for systems that need 100% reliability.
Or if it's very structured and testable. For example, we're seeing great value in rebuilding a Grafana instance from manually managed to scripted dashboards. After a bit of scaffolding, some style instructions and a few example systems, you can just chuck it a description and a few queries, it just goes to successful work and just needs a little tweaking afterwards.
Similar, we're now converting a few remnants of our old config management to the new one using AI agents. Setup a good test suite first, then throw old code and examples of how the new config management does it into the context and modern models do that well. At that point, just rebuilding the system once is better than year-long deprecation plans with undecided stakeholders as mobile as a pet ferret that doesn't want to.
It's really not the code holding the platform together, it's the team and the experiences and behaviors of people.
It makes sense for junior admins and junior platform engineers to leverage LLM's but I'd be highly skeptical for the future skillset of any junior software engineer who leverages LLM's right off the bat, unless we have already moved that goalpost.
Ya, this is the issue. LLMs are not great for developing minds. A lot like the internet presently, to be frank.
For fully developed and experienced minds, both can be useful.
You’re not wrong. You’re not the only one saying this either. Though, I’m currently of the mind that the concern is overblown. I’m finding Opus 4.6 is only really capable of solving a problem when the prompt explains the fix in such concrete detail that coding is incredibly straightforward. For example, if the prompt has enough detail that any decent human programmer would read it and end up writing basically the same code then Claude can probably manage it too.
While I haven’t used other models like Codex and Gemini all that much recently, Anthropic’s is one of the top-tier models, and so I believe the others are probably the same in this way.
A junior’s mind will not rot because the prompt basically has to contain detailed pseudocode in order to get anywhere.
> He figured: "It's weird, you actually end up thinking and poking at a problem for a week or two, and then it actually folds into a very small amount of code. And sure, Copilot helped a bit with some boilerplate, but that was only after figuring out how to structure and hold it".
Let me just get you that Fred Brooks quote, now where was it...? Ah, yes, here's one:
https://news.ycombinator.com/item?id=4560756
We didn't even have to offshore for lots of bad code to be written.
Looks at the scores of Ycombinator startups that wrote a shitload of awful code and failed. Good ideas, pretty websites, but not a lot of substance under the hood. The VC gathering aspect and online kudos was way more important to them than actually producing good code and a reliable product that would stand the test of time.
Pretty much the most detestable section of the HN community. IMNHSO. I notice they're much quieter than usual since the whole vibe coding thing kicked off.
> Looks at the scores of Ycombinator startups that wrote a shitload of awful code and failed.
This can also be restated as, look at all the startups that wrote a shitload of awful code and succeeded.
That’s an indicator code quality doesn’t matter at macro scales. We already knew this though even if we didn’t explicitly say it. It’s more about organization, coordination, and execution than code.
This seems like it's reading too much into things. I'm sure driving an ambulance slower vs faster doesn't make a difference to survival in most cases, but on the margins it absolutely does.
Startups are also quite different from ambulances; surviving and minimising patient harm isn't the most important thing for a startup. Instead, it's building a profitable and valuable business. You're not just worrying about the margins, you're also hoping to squeeze out every bit of growth you can.
> That’s an indicator code quality doesn’t matter at macro scales.
I think it can though. It just depends. Having high quality code and making good technical choices can matter in many ways. From improving performance (massively) and correctness, to attracting great talent. Jane Street and WhatsApp come to mind, maybe Discord too. Just like great design will attract great designers.
I also think it might matter even more in the age of AI Agents. Most of my time now is spent reviewing code instead of writing code, and that makes me a huge bottleneck. So the best way to optimize is to make the code more readable and having good automated checks to reduce the amount of work I need to do, like static types, no nulls, compilation, automated tests, secondary agent reviews, etc.
I mean, look at all the startups that succeeded despite being complete shitshows behind the scenes... the baseline for leadership, organization, coordination or, hell, execution for a startup to succeed isn't exactly high either.
They left ages ago, around the time PH got big.
I can't remember the last time I saw a '10 ways to fit 25 hours in 24 hours' type article on here, which were rife 10 years ago.
What's PH?
Product Hunt (I assume)
I think it is a misnomer to attribute startup failure to bad code. There are so many other factors at play that are more powerful.
Not to say the crowd u speak of doesn’t exist, they do.
One thought experiment I keep having when I see LLM hype: imagine if our outsourcing companies could be as blasé about copyright as OpenAI, and how profitable they could be.
I mean, rename some dudes over there to ‘transformer’, and let them copy & paste from GitHub with abandon… I know we could get a whole browser for less than a few grand.
We wouldn’t, because it’d be copyright-insane. But if we just got it indirect enough, maybe fed the info to the copiers through a ‘transforming’ browser to mirror the copyright argument, I bet we could outperform OpenAI in key metrics.
Coding is formalizing for the compiler. The other 99% of the job is softly getting the PHB not to fuck the entire company and being unique in not doing dumb shit everyone thinks is popular now but will regret soon. It’s all like IT tribal tattoos. Barely cool for a couple of years, and then a lifelong source of shielded regret.
I'm surprised you think this hasn't been happening for years, in smaller offshore shops.
PHB = pointy-haired boss?
> I never heard that
I did, a lot, maybe fifteen years ago. There was a lot of talk about a "3D printing revolution" and being years away from being able to make whatever you want at home. For a while, the "maker" moniker was strongly associated with home manufacturing maximalists.
I still don't get the point the article is making, though. That 3D printer thinking was obviously naive because it underestimated the difficulty of mechanical design and the importance of the economies of scale. Using AI to "write" or "code" is a lot easier than turning a vague idea for a household good into a durable and aesthetic 3D print, so it's apples to oranges.
There are other things that the vibecoding movement is underestimating - when you pay a SaaS vendor, you're usually not paying for code as much as for having a turnkey solution where functionality, security, infrastructure, and user support are someone else's problem. But I think that's pretty much where the parallels end.
Also hiring. It's easier to find people with JIRA experience than people in your vibe-coded ticket manager, even if it is technically superior for your application.
If there is any commonality between the 3D printing craze and vibe-coding, they're both renditions of "just because you can, doesn't mean you should".
I was a kid at the time, but adults, magazines, and other children convinced me that 3D printing at home would likely replace a huge number of products. This included extremely optimistic speculation, like printers producing smart phones or houses. Then I dated a boy who used his 3D printer to substitute The Container Store at a higher cost with greater effort and lower quality, and that soured me on the concept.
I think we'll see this slowly march along. I just made some custom-designed speaker tilt mount things for my desk. Sure, it's a trivially simple example, but a lot of things are. I was able to get the exact angle I wanted, bigger than most and in a design I liked, crafted by AI in 5 minutes, and on my desk by the next morning and for a fraction of the price of a Chinese made Amazon version.
It's no replicator, but give it 5 years and it might be surprising how useful it is.
What we're seeing instead are companies you can send CAD files to, get estimates, and receive the parts back in a few days.
3d printing matured. My makerspacr's 3d printing room is now more busy than it ever been.
But the real magic happens in CAD while printers are good enough that it gets out of your way.
I remember hearing “trek replicator” in things like pop mechanics, back in the 90s.
Then it was a lot of “self replicating printers” for quite a while, which never has been a real thing.
Certainly there’s utility in the technology, and much moreso if you’re making aircraft parts. And I love prototyping with my various machines.
But I agree, it has had far more than its fair share of hype at the home printer level.
> Then it was a lot of “self replicating printers” for quite a while, which never has been a real thing.
3D-printed 3D printers got quite far; the reason why this topic got out of perception by people who are not 3D printing nerds is rather that for mass production of 3D printers there exist much better processes.
What was realized was that up to a certain amount of parts, 3D printing these parts on a 3D printer works really well. You can find a lot of designs of such 3D printers on the internet.
Concerning the progress here, also observe that over the last years, home 3D printers got a lot better with respect to handling "engineering materials". These materials are very useful if you want to (partly) 3D-print a 3D printer, but this development is often not associated with "3D-printing 3D printers". :-)
Then you get to parts which can be printed on a 3D printer, but these parts will not be of the same quality as parts that can easily be bought, such as belts etc. The Mulbot is a design that takes this approach very far:
> https://github.com/3dprintingworld/Mulbot
> https://www.printables.com/model/5995-mulbot-the-mostly-prin...
And then you get to parts that are nearly impossible to print on a 3D printer ...
So, after there was a consensus where the boundaries lie how much a 3D printer can sensibly be 3D-printed, people started looking at other manufacturing techniques that exist for producing parts of 3D printers, and started considering
1. could and how far could a machine for this process be 3D-printed (or produced on a 3D-printed machine)?
2. could we bring such a machine to home manufacturing, too (so that people can easily build such a machine at home)?
Machines that were considered for this were, for example, CNC mill (3, 4 and 5 axis), CNC lathe, pick and place machines (for producing PCBs), ...
There do exist partial implementations of such machines, just to give some examples:
- lots of designs of CNC mills that use 3D-printed parts. I won't give a list here, but just want to mention that the "Voron Cascade" project wants to do for home 3 axis CNC milling what the Voron did for 3D printing. Rumors on the internet say that the Voron Cascade is well on the way, but had quite a lot of delays with respect to announced release dates.
- an attempt to build a pick and place machine: https://hackaday.io/project/169354-3d-printed-pick-and-place...
Thus: I hope I could give evidence that in the last years there still were a lot of developments towards the far goal of "self-replicating 3D printers", but these developments were rather silent, impressive developments instead of loud, obtrusive marketing stunts.
> or houses
They're not common by any means, but they do exist. Walls look pretty ugly though.
And there are reports they aren't lasting very long before cracking.
Just like with vibecoding complains, have you tried the latest models (of 3d printers)? Specifically, Bambu's latest models make the printer a device to just use rather than the project itself. It's the Apple of 3d printing. Previously, you'd spend hours on calibrating and leveling nonsense. Latest models don't have this problem. Open the app on your phone, (doom)scroll until you find something, and just hit print from your phone. You can make it more complicated as desired, but it's not necessary to get something out of your printer.
Which apes vibecoding. ChatGPT 3.5 was laughably bad compared to codex 5.3, but if you're basing your opinion on 3.5's performance, your opinion's out of date.
I recently wrote a blog post about exactly this, and I agree with your perspective. Vibe coding helps with showing other people your idea and get them to understand it, try it and, most importantly, help you fail fast. But as the product matures, the gains of using LLM's and agentic engineering will go from 10000% efficiency to something like maybe 30(?)% productivity gain? Which is still awesome, of course.
"The real test of Vibe coding is whether people will finally realize the cost of software development is in the maintenance, not in the creation."
https://blog.oak.ninja/shower-thoughts/2026/02/12/business-i...
It's not awesome, not for us. 30% productivity gain would be enormous. Just imagine 30% of developers losing their jobs, in addition to outsourcing and all the new graduates flooding out of colleges after CS has been hyped so much in the recent years.
I really doubt that 30% productivity gain would result in 30% developers losing their jobs. Believing this would require an assumption that businesses and economies will never grow.
Do you know how many 30% productivity gains I’ve seen over the last 25 years? How many people before me saw in the 25 years before that?
And? Nothing you can do against it.
IT and coding was a good carrier for a long time, but times are changing.
> It's not awesome, not for us.
Depends on where you stand. Maybe leet code won't be a common thing (can be solved with AI), maybe they'll look for different skills, etc.
If losing 30% means hiring the right people for the job you might have better chances. For a long time these were never aligned properly.
There was certainly a contingent who believed that 3d printing was going to replace all other forms of manufacturing. It was even going to make custom food for us on order.
If you balked at the idea, then you were the bad guy, or treated with pity for being so out of touch. Usually you got the Kubler-Ross Stages thrown at you.
> It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale
No, it never seemed that way to the realists, but it was said to seem that way to the makerspheres.
Definitely a fantasy land ideal. Much like pitches from the Free Software Foundation of a world without copyright and IP. It's just never going to exist because reality just isn't that way.
> Much like pitches from the Free Software Foundation of a world without copyright and IP.
Didn't the big AI vendors kinda bring that to fruition?
> It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it?
It didn’t and I’m not sure anyone who knew anything about at-scale manufacturing ever saw it that way. Injection molding is far cheaper per unit and more accurate.
But 3D printing has made a major impact on prototyping. Parts that would have taken serious machine shop work or outsourcing can be printed in a few hours. It really changed the game for mechanical engineers.
In terms of vibe coding, time to demo/prototype is greatly reduced. That definitely takes time and cost away from R&D. But I don’t know that it’s had much impact on transfer to manufacturing, which can easily be the hard final 20%.
The people who did best during the gold rush were the people who went out and were lucky enough to find stockpiles of gold.
> Vibe coding, on the other hand, is competing against hand coding, and for many use cases is considerably more efficient. It’s clearly replacing a lot of hand coding.
It seems like a lot of vibe coders are people who otherwise wouldn't be coding at all.
Yeah, it's like saying that the amateur rocketry guys on youtube are going to replace NASA.
Good example! 90 percent ( or even more) of code do not need NASA level code. Vibe coding is good enough.
Just like a five dollar t shirt is enough for many many people
If 90% of code is for hobbies that don't cost anyone anything when it breaks, great - but launching rockets into space with million or billion dollar payloads is akin to software that makes millions or billions of dollars, and vibeslop is simply a liability at best in any real use case past a weekend hobby project.
The vibe coders wish they could produce the equivalent of a $5 teeshirt. Or they think they are because they don't have the ability to tell.
It was promised but it never materialised. Everyone was saying we'd all have a 3D printer at home and there'd be no market for niche products any more because we'd just print them on demand.
Correct. Almost nobody talked about “getting manufacturing back to the US”. Almost always it was just people glad they could build things.
Its also interesting how the author frames the results: Shenzhen is now better than it was ever before at manufacturing. The maker culture succeeded!
> Almost nobody talked about “getting manufacturing back to the US”.
I guess the President of the United States is an almost nobody. Obama's 2013 State of the Union hyped up 3-D printing explicitly as a tech that would be bringing manufacturing back to the U.S. The U.S. government made public-private partnerships with maker spaces and fab facilities in hollowed out Rust Belt cities, and Obama mentioned it by name in the most important and viewed policy speech the President gives each year.
> “A once-shuttered warehouse is now a state-of-the art lab where new workers are mastering the 3-D printing that has the potential to revolutionize the way we make almost everything,” Obama said. [...] Obama announced plans for three more manufacturing hubs where businesses will partner with the departments of Defense and Energy “to turn regions left behind by globalization into global centers of high-tech jobs.” (https://edition.cnn.com/2013/02/13/tech/innovation/obama-3d-...)
>Companies will be happy to have a way to press down the budget of a cost center, but the delta won’t make or break that many businesses.
Software companies spend a huge amount of money on having software written. Why would significantly altering the cost structure not make or break companies?
They're spending money on producing software, not lines of code - for now that's a distinction
I also don't think the "maker movement" disappeared, it's just that the bar for making stuff is so much lower now that anyone and their grandmother can do it.
In the past weeks I:
- 3D printed custom cups that fit onto a pet feeder to prevent ants from getting to our cat food
- 3D printed custom mounts to mount 3W WS2812 LEDs to illuminate Chinese New Year lanterns and connected them to an ESP32 WLED box connected to home assistant
- Connected an vision language model to a security camera that can answer questions about how many times a cat has eaten, drank water, used the toilet, and inform us about any things in the room that look abnormal
- Custom laser cutted a wall fitting for a portable heat pump input and output condenser hoses and added a condensate pump to the contraption, it saves us $200/month in heating costs
- Custom designed a retrofit for a sliding door that accepts a Nuki smart lock that wasn't designed for this type of door.
- Custom laser cutted a valentines day card in Chinese paper cutting style that was generated with many rounds of back and forth prompting with Gemini, then converted to SVG and cut
- My wife and I thought IKEA SKADIS pegboards would look better if they were made out of bamboo plywood, so I shoved a sheet of bamboo into my laser cutter and had it cut out a pegboard that looked much nicer, sprayed it with lacquer, then attached it to the wall with 3D printed mounting hardware. The SVG for the pegboard was generated by a script written by Cursor and took a couple of minutes.
- Having an ESP32 feed a camera image to an LLM and then do something with the result is a piece of cake. A box that "sprays water to deter the cat if the cat jumps on the kitchen counter" is a 1-hour job after you order the components from Amazon, and an LLM will build that parts list for you, too.
- Reverse enginereed the firmware of a Unifi Chime to upload more chime sounds than the UI limits you to, so that I can have Unifi Protect announce if there is an intruder somewhere late at night and where. Cursor reverse-engineered the firmware .bin for me.
A lot of this could have been worth sharing 10 years ago. Now all of this is just "normal life in 2026" so you don't hear about it much. I'm used to thinking of something and then physically having it <12 hours later. It's no longer an undertaking. It's not news anymore.
The bar for "news-worthiness" for makers these days? This guy built an entire city for his cats, with a full functional subway system and everything ...
https://www.youtube.com/watch?v=G4UEugp_mf0
> BTW, I think a lot of people were/are greatly overestimating the value of coding to business success.
I've frequently argued to my organization's leadership that the product could be open source on GitHub with a flashing neon sign above it and it wouldn't change anything about the business. A competitor stealing our codebase would probably be worse off than if they had done anything else. Conway's law and all that.
One of the odd things people do with tech is taking someone else's random projections at face value?
What does it mean to say "we were promised flying cars", or "every city would have micro-factories, that 3D printing would decentralize production"?
The people creating these narratives may a) truly believe it and tried to make it a reality, but failed b) never believed it at all, but failed anyway, c) or be somewhere else on this quadrant of belief vs actuality.
Why not just treat it as, "a prediction that went wrong". I suppose it's because a narrative of promise feels like a promise, and people don't like being lied to.
It's a strange narrative maneuver we keep doing with tech, which is more future-facing than most fields.
Well, there's also the almost never mentioned Rock's Law:
https://en.wikipedia.org/wiki/Moore%27s_second_law
We do have flying cars, and we do have printers that print other printers, but both were some combination of really expensive/poor quality. Technically speaking, if you take it that most cities have 3D printers, most cities then do have micro factories, however that says nothing about general feasability...
Technology requires infrastructure and resources, and our infrastructure is strained and our resources are even more so... Until the costs become pocket change for the average person, technology will just remain generally unavailable.
> What does it mean to say "we were promised flying cars"...
I don't know about the other things you mentioned, but I think you have this in the wrong category. "We were promised flying cars" is one half of a construction contrasting utopian promises/hype with dystopian (or at lest underwhelming) outcomes. I think the most common version is:
> They promised us flying cars, instead we got 140 characters.
Translation: tech promised awesome things that would make our life better, but instead we actually got was stuff like the toxicity of social media.
IMHO, this insight is one of the reasons there's so much negativity around AI. People have been around the block enough to have good reason to question tech hype, and they're expecting the next thing to turn out as badly as social media did.
> It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it?
There was a point of time where some people looked at 3d printers and said "Wow, imagine how great this technology will be in 20 years." There was some amount of anticipation for multi-material printers to come around and for home printers to begin replacing traditional consumer goods. Compared to crypto, vr, and ai it doesn't look like much but 3d printing did go through a hype bubble.
> It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it?
It's really hard to beat injection molding for scale.
However, what 3D printing did shift was building molds and prototypes. And that shifted small volume manufacturing--one offs and small volumes are now practical that didn't used to be. In addition, you can iterate more easily over multiple versions.
The limiting factor, however, has always been the brain power designing the thing. YouTube is littered with videos that someone wants to build a "thing" and then spends 10-20 iterations figuring out everything they didn't know going into the project. This is no different from "real" projects, but your experienced engineering staff probably only take 5 iterations instead of 20.
3D printing is giving my company many benefits over injection molding. We have 6 variations of the case for our device and we're always coming up with improvements and new functionality, and new products. I only see us expanding our in-house resin print farm instead of building out injection molds. No, we aren't selling millions of units, but injection molding is just too expensive for anything but a 1-size-fits-all solution.
> I never heard that. It didn’t seem like 3D-printing ever showed sings of displacing existing ways of manufacturing at scale, did it? Units per hour and dollars per unit was never its strength. It was always going to be small things (and if anything big grew out of it, those would naturally transition to the more efficient manufacturing at scale).
There were articles posted on HN hyping exactly that, with comments debating whether 3D-printing would eventually replace conventional manufacturing at scale, and how people would no longer shop at stores like Walmart for their cheap products.
> As always, the people selling pick-axes during the gold rush will probably do the best.
it's the people that sell the pickaxe pickaxes.
Let’s be real, it’s the men who run brothels.
https://www.cbc.ca/news/canada/trump-canada-yukon-1.3235254
> I never heard that.
Once the predictions of a magical future turn out to be false, techies suddenly don't remember. Kind of like when the cult leader's prediction of doomsday doesn't show, there's always another magical prediction of a new future coming. Here are just a few major mainstream sources:
2012, Cornell Prof and Lab Director, in CNN: "We really want to print a robot that will walk out of a printer. We have been able to print batteries and motors, but we haven’t been able to print the whole thing yet. I think in two or three years we’ll be able to do that." (https://www.cnn.com/2012/07/20/tech/3d-printing-manufacturin...)
2013, World Economic Forum: "the world can be altered further if home-based 3D printing becomes the norm. In this world, every home is equipped with a printer capable of making most of the products it needs. Supply chains that support the flow of products and parts to consumers will vanish, to be replaced by supply chains of raw material." (https://www.weforum.org/stories/2013/08/will-3d-printing-kil...)
2013, President of the United States of America Barack Obama hypes up 3-D printing in the State of the Union as a technology that will bring manufacturing back to the U.S.: “A once-shuttered warehouse is now a state-of-the art lab where new workers are mastering the 3-D printing that has the potential to revolutionize the way we make almost everything..." Obama announced plans for three more manufacturing hubs where businesses will partner with the departments of Defense and Energy “to turn regions left behind by globalization into global centers of high-tech jobs.” (https://edition.cnn.com/2013/02/13/tech/innovation/obama-3d-...)
2012, Cover story and special issue of The Economist predicting another Nth industrial revolution:
"THE first industrial revolution began in Britain in the late 18th century, with the mechanisation of the textile industry. Tasks previously done laboriously by hand in hundreds of weavers’ cottages were brought together in a single cotton mill, and the factory was born. The second industrial revolution came in the early 20th century, when Henry Ford mastered the moving assembly line and ushered in the age of mass production. The first two industrial revolutions made people richer and more urban. Now a third revolution is under way. Manufacturing is going digital. As this week’s special report argues, this could change not just business, but much else besides.
A number of remarkable technologies are converging: clever software, novel materials, more dexterous robots, new processes (notably three-dimensional printing) and a whole range of web-based services. The factory of the past was based on cranking out zillions of identical products: Ford famously said that car-buyers could have any colour they liked, as long as it was black. But the cost of producing much smaller batches of a wider variety, with each product tailored precisely to each customer’s whims, is falling. The factory of the future will focus on mass customisation—and may look more like those weavers’ cottages than Ford’s assembly line." (archive: https://communicateasia.wordpress.com/2012/04/20/manufacturi...)
At some scales, Obama was right... a lot of companies that do plastic extruded parts also do 3D printing for lower volume fulfillment. You can also do some types of parts that you couldn't make through extrusion.
It's especially funny because HN commenters are some of the most likely people to make wild, sweeping claims then once they don't come true, turn back around and say "well no one was actually saying that anyway."
Or I just realized that if they are a 22 year old college graduate, they were in elementary school when the 2012-2014 3-D printing hype cycle was at its peak.
> BTW, I think a lot of people were/are greatly overestimating the value of coding to business success.
I think I have a conversation at least weekly where I have to explain to someone that using an LLM to convert COBOL to Java (or whatever) will not actually save much effort. I don’t know how many ways to explain that translating the literal instructions from one language to another is not actually is not that hard for someone fluent in both and the actual bottleneck is in understanding what sort of business logic the COBOL has embedded in it and all the foundational rearchitecting that will involve.
The people selling vibe code pick-axes are buying them for 50 dollars and selling them for 20. Not sure if they will do the best
> BTW, I think a lot of people were/are greatly overestimating the value of coding to business success.
Uh, no they're not. Did you not see the recent announcement from unity. One short prompt and you get a whole AAA+ game in one shot.
/s
vibe coding is only "more efficient" if you ignore the massive energy costs involved
> When you spend two years making useless Arduino projects, you develop instincts about electronics, materials, and design that you can’t get from a tutorial. When vibe coding goes straight to production, you lose that developmental space. The tool is powerful enough to produce real output before the person using it has developed real judgment.
The crux of the problem. The only way to truly know is to get your hands dirty. There are no shortcuts, only future liabilities.
Then again, sophisticated manufactured electronics had long been cheap and available by the time somebody thought to create Arduino as a platform in the first place.
And even today, people hack on assembly and ancient mainframe languages and demoscene demos and Atari ROMs and the like (mainly for fun but sometimes with the explicit intention of developing that flavor of judgment).
I predict with high confidence that not even Claude will stop tinkerers from tinkering.
All of our technical wizardry will become anachronistic eventually. Here I stand, Ozymandius, king of motorcycle repair, 16-bit assembly, and radio antennae bent by hand…
You're absolutely right -- that's the crux of the problem. There are no shortcuts, only future liabilities.
If you didn't catch it, this is a joke calling out the comment above it for using a couple obvious LLM-isms. The comment above may have been a joke, too. It's hard to tell any more.
> It's hard to tell any more.
Wait, I think I have the answer!
"You're in a desert, walking along in the sand when all of a sudden you look down and see a tortoise. It's crawling toward you. You reach down and flip the tortoise over on its back. The tortoise lays on its back, its belly baking in the hot sun, beating its legs trying to turn itself over. But it can't. Not without your help. But you're not helping. Why is that?"
Hm... Why? Ah! Because you are also a tortoise
Tortoise have been observed righting other tortoise that have become stuck. https://www.youtube.com/shorts/DZ57D608fiM (two tortoises helping a third) this has a terrible voiceover but you get the idea
> You're absolutely right
Bot detected
But crucially they used "--" and not "—" which means they're safe. Unless it's learning. I may still be peeved that my beloved em dash has been tainted. :(
Of course they'll learn. LLM bots have been spotted on HN using that hipster all lower case style of writing.
i can write like this if i want. or if i were a clever ai bot.
No need to be clever, just add the instruction to write in that way.
Never admit when someone else is right. They'll forget they were right and begin to think they won a fight.
Or something. You're right.
I think that's the joke.
I found the key insight -- when a human tries to sound like an LLM, that's perceived by other humans as humor.
Not sarcasm. Not cynism. Just pure humor.
Oh my God, this is peak GPT.
The issue is clear
Yep. Increases output but reduces understanding.
Couldn't one rebut that Arduino is plug-and-play without getting your hands dirty in lower-level electronics?
The article addresses this by making the point that prototypes != production. Arduino is great for prototyping (authors opinion; I have limited experience) but not for production-level manufacturing.
LLMs are effectively (from this article's pov) the "Arduino of coding" but due to their nature, are being misunderstood/misrepresented as production-grade code printers when really they're just glorified MVP factories.
They don't have to be used this way (I use LLMs daily to generate a ton of code, but I do it as a guided, not autonomous process which yields wildly different results than a "vibed" approach), but they are because that's the extent of most people's ability (or desire) to understand them/their role/their future beyond the consensus and hype.
I think even calling them MVP factories is a bit much. They're demo factories. Minimum Viable Products shouldn't have glaring security vulnerabilities and blatant inefficiency, they just might me missing nice-to-have features.
Not, because it isn’t. A plug and play arduino is useless without some level of circuit building expertise.
I might be tilting at a strawman of your definition of vibe coding - apologies in advance if so.
But LLM-aided development is helping me get my hands dirty.
Last weekend, I encountered a bug in my Minecraft server. I run a small modded server for my kids and I to play on, and a contraption I was designing was doing something odd.
I pulled down the mod's codebase, the fabric-api codebase (one of the big modding APIs), and within an hour or so, I had diagnosed the bug and fixed it. Claude was essential in making this possible. Could I have potentially found the bug myself and fixed it? Almost certainly. Would I have bothered? Of course not. I'd have stuck a hopper between the mod block and the chest and just hacked it, and kept playing.
But, in the process of making this fix, and submitting the PR to fabric, I learned things that might make the next diagnosis or tweak that much easier.
Of course it took human judgment to find the bug, characterize it, test it in-game. And look! My first commit (basically fully written by Claude) took the wrong approach! [1]
Through the review process I learned that calling `toStack` wasn't the right approach, and that we should just add a `getMaxStackSize` to `ItemVariantImpl`. I got to read more of the codebase, I took the feedback on board, made a better commit (again, with Claude), and got the PR approved. [2]
They just merged the commit yesterday. Code that I wrote (or asked to have written, if we want to be picky) will end up on thousands of machines. Users will not encounter this issue. The Fabric team got a free bugfix. I learned things.
Now, again - is this a strawman of your point? Probably a little. It's not "vibe coding going straight to production." Review and discernment intervened to polish the commit, expertise of the Fabric devs was needed. Sending the original commit straight to "production" would have been less than ideal. (arguably better than leaving the bug unfixed, though!)
But having an LLM help doesn't have to mean that less understanding and instinct is built up. For this case, and for many other small things I've done, it just removed friction and schlep work that would otherwise have kept me from doing something useful.
This is, in my opinion, a very good thing!
[1]: https://github.com/FabricMC/fabric-api/pull/5220/changes/3e3...
[2]: https://github.com/FabricMC/fabric-api/pull/5220/changes
The maker movement comparison is interesting but I think it breaks down in one key way: the marginal cost of software distribution is basically zero. 3D printing still requires physical materials and shipping. Vibe coded apps can reach users instantly if there's a discovery mechanism.
The real parallel might be the early web era where anyone could make a website but finding them required Yahoo directories and later Google. Right now vibe coded apps have the same discovery problem - they exist but there's no effective way to find or evaluate them.
Ok, i just generally disagree with the premise. Why does it have to be "100% vibe coded" or "0% vibe coded"? There is a very happy medium that is getting ignored here. As a coder with various language experiences, i can just get like a good kick and a template with Claude and continue in any language i want and have the LLM do the redundant parts. As someone with some soldering experience, i could have an LLM cook up and explain a circuit that might have taken me months trying to mangle myself. I think LLMs empower creativity more than ever, and creative people can have a wonderful time with LLMs softening the initial headbanging and tedious redundancies of any project.
LLMs = The Age of the Builder
Never has it been more exciting to be a builder (software)! So much momentum and so little getting blocked. I am learning faster than ever even with LLMs doing so much of the heavy lifting. It is so fast to iterate and just MAKE STUFF!!!
I'm right there with you!
Did the maker movement end? I dont think so, its just as niche as its always been. We have plenty of maker type posts on here. I dont think “vibe” coding is going away. Especially with so many open source models you can run on a simple Mac.
It didn't end, it just failed to commercialize, which IMO is a better outcome anyway. Many more communities today have something akin to a maker space than before the movement. It succeeded to a point that it became mundane.
I think it stunted out. Outside of only the densest areas, maker spaces never really formed. The stuff remains accessible as a hobby only to the wealthy who can afford all these tools and machines in the majority of the country. I'm a nearly 40 minute drive to the closest maker space and I'm in one of the 10 densest populated cities in the country. The last city I lived in, the maker space was too popular and raised their fees so high that it is also impossibly inaccessible to most people.
I'm not trying to defend maker spaces, though they make more sense to me in a college setting. My college had (has?) one and one of our professors really made sure to always use it, and have students use it and learn. Immense value there, even if only a dozen or less use it every year, its still an avenue for inspiration.
I saw that happen in a decent sized college town near where I live. They had a maker space spring up when 3D printing was the hottest thing. It didn't last very long though. I'm a bit surprised that 3D printer machines haven't become cheaper. Like solid machines sub-$100. 3D printer pens are the only thing that came close to doing that.
They're already very cheap, almost free when you buy used. I got one for $50 that makes pretty good prints. For $300 you can buy an Elegoo Centauri Carbon that is a really high end consumer printer. Don't forget that we're talking about CNC machine tools with precision movements here. An entry level manual milling machine from Precision Matthews in Taiwan will cost you $250 shipping alone. Even good linear rails by themselves are more than $300 on ebay. A lot of innovation has been happening in the 3D printer space to make all these machine components cheaper which has also benefited other applications like hobbyist milling.
Nowadays, we are so used to all the injection molded plastic crap, and also so much poorer, that we can't understand why precisely manufactured products made from solid metal or wood are so expensive.
> Like solid machines sub-$100.
You can get 3D printers from BestBuy(!) for $200 retail. At that point, the cost of the filament is going to quickly exceed the cost of the machine.
At the $200 price point, your Bill of Materials is roughly $65 (about 1/3 of the retail cost). I challenge you to buy the raw materials of a 3D printer for under $100 let alone $65.
I think its the Ender that goes as low as $170 or so, which isn't terrible.
For sure the prices aren't terrible. But I figured they would get cheaper still.
To me the maker movement is alive as ever. Sure the arduino has died a death, but pico, esp32 and various other microcontrollers evolved the entire system, and with wifi too.
> Did the maker movement end? I dont think so
Bump.
Because we had our first high profile murder using a 3d printed weapon just last year.
The author of this article gives a more balanced POV than mine. I think most (maybe overwhelming majority) of publicized vibe coding projects are complete technical virtue signaling.
With agentic loops, you specify what you want and it continues to do stuff until ‘it works’. Then publish. Its takes less time and attention. So projects are less thought out and less tested as well.
In the end, I think it’s not about how a project was created. But how much passion and dedication went into it. It’s just that the bar got lowered.
Every market on some level can be analogized to a common and simple market.
One of the common examples in management books is the signage industry. You can have custom logos custom molded, extruded, embossed, carved, or at least printed onto a large, professional-looking billboard or marquee size sign. You can have a video billboard. You can have a vacuum formed plastic sign rotating on top of a pole. At the end of the day, though, your barrier to entry is a teenager with a piece of posterboard and some felt-tipped markers.
What has happened is that as the coding part has become easier, the barrier to entry has lowered. There are still parts of the market for the bespoke code running in as little memory and as few CPU cycles as possible, with the QA needed for life-critical reliability. There’s business-critical code. There’s code reliable enough for amusement. But the bottom of the market keeps moving lower. As that happens, people with less skill and less dedication can make something temporary or utilitarian, but it’s not going to compete where people have the budget to do it the higher-quality way.
How much an LLM or any other sort of agent helps at the higher ends of the market is the only open question. The bottom of the market will almost certainly be coded with very little skilled human input.
I think it's often genuine excitement to share a thing - without quite processing that anybody with the same idea can now build it (for simple- to mid-complexity projects).
I also think it is often momentum from “do you have a GitHub” questions you see in hiring.
There are many people who code to make cool stuff and enjoy sharing, but there is even more people who code to look good on CV.
I’m not trying to be mean, this is just an anecdote I had from my time hiring.
KG: Anybody coulda wrote it, anybody coulda done that, one song, just one note
JB: Yeah but guess who did write it, me!
KG: Yeah but did you write this?
JB: Dude, I did, I told you to do the bendy every once in a while!
https://www.youtube.com/watch?v=TLvOLjHt4S0
I win. 1 to nothing!
This is the part I don't understand. It's like sharing a finger painting half the time. Yes, cool, but so what?
[Edit: no need for the downvote, folks, it was an honest question although it seemed otherwise. I think the answers below make sense.]
The novelty of "new thing! That would have been incredibly hard a decade ago!" hasn't worn off yet.
This isn't the first time something like this has happened.
I would imagine that people had similar thoughts about the first photographs, when previously the only way to capture an image of something was via painting or woodcutting.
When movies first came out they would film random stuff because it was cool to see a train moving directly at you. The novelty didn't wear off for years.
There was something someone said in a comment here, years and years ago (pre AI), which has stuck with me.
Paraphrased, "There's basically no business in the Western world that wouldn't come out ahead with a competent software engineer working for $15 an hour".
Once agents, or now claws I guess, get another year of development under them they will be everywhere. People will have the novelty of "make me a website. Make it look like this. Make it so the customer gets notifications based on X Y and Z. Use my security cam footage to track the customer's object to give them status updates." And so on.
AI may or may not push the frontier of knowledge, TBD, but what it will absolutely do is pull up the baseline floor for everybody to a higher level of technical implementation.
And the explosion in software produced with AI by lay-people will mean that those with offensive security skills, who can crack and exploit software systems, will have incredible power over others.
are you sure that AI generated code will be more vulnerable than a median software engineer? Why?
I believe the security vulnerability issues will be addressed with companies using cloud based vibe-code platform or a ai security auditor agent that runs through the code base and flags security issues.
It's always a year® away. The amazing AI capability is "just around the corner"©. It will replace jobs soon™.
How much longer do we have to put up with people saying this? It's been four years now.
The things that people were saying were a year away a year or two ago are now here.
The things I am saying are now a year away, are not the things people were saying were a year away two years ago.
And you're going to have to put up with it forever, because "a year in the future" has always and will always be a year away.
And yet it's never "now". The promised results are never here.
I understand one of the chief innovations the AI industry produces is rhetoric and hype, but it's insufferable and repetitive.
A better AI isn't good enough. "Closer" to a stated goal isn't good enough.
Deliver results that have value to more than just enthusiasts and academics.
Sure it is. AI software development is here. It's not good enough for everything, but it's good enough for a majority of the changes made by most software engineers.
That's now. Right now, the tooling exists so that for >80% of software devs, 80% of the code they produce could be created by AI rather than by hand.
You can always find some person saying that it'll destroy all jobs in a year, or make us all rich in a year, or whatever, but your cynicism blinds you to the actual advances being made. There is an endless supply of new goalpost positions, they will never all be met, and an endless supply of chartalans claiming unrealistic futures. Don't confuse that with "and therefore results do not exist".
No, it isn't. There is a gigantic chasm of difference between "80% of code they produce could be created by AI" and "80% of commits they produce could be created by AI".
Mixing the two up is how we get a massive company like Microsoft to continually produce such atrocious software updates that destroy hardware or cause BSODs for their flagship Operating System.
That's not replacing software development. That's dysfunction masquerading as capability.
And none of what I said is goalpost moving. They are the goalposts constantly made by the AI industry and their hype-men. The very premise of replacing a significant amount of human labor underlies the exorbitant valuation AI has been given in the market.
We'll just have to agree to disagree.
It appears that your understanding of AI code generation reflects the state of 1-2 years ago. In which case of course it seems like what people are describing as reality, feels 1-2 years away.
> There is a gigantic chasm of difference between "80% of code they produce could be created by AI" and "80% of commits they produce could be created by AI".
This is exactly the goalpost moving I am talking about. I said 80% of code could be AI-written, you agreed, and followed up with "oh but it doesn't matter because now we're measuring by % of commits".
>The promised results are never here.
Today I fed to Opus 4.6 five screenshots with annotations from the client and told it to implement the changes. Then told it to generate real specs, which it did. I never even looked at the screenshots, I just checked and tested against the generated specs. Client was happy.
I don't know what it means.
Did you try the new models that came out in the end of last year? -- It's not just progress it's a breakthrough. /s
Because these people aren't excited about the actual building part, they crave the attention, the github stars, the views, &c. It's painfully obvious
I have a similar feeling to people who upload their AI art to sites like danbooru. Like I guess I can understand making it for yourself but why do you think others want to see it
xkcd turned stick figure drawings into an art form. sometimes it is not about how something was created, but about the story being told.
some people build apps to solve a problem. why should they not share how they solved that problem?
i have written a blog post about a one line command that solves an interesting problem for me. for any experienced sysadmin that's just like a finger painting.
do we really need to argue if i should have written that post or not?
Even if status-signaling through this vector loses it's lustre, AI slop (agentic or otherwise) will not, and some of that slop will take on the guise of "vibe-coding" projects.
I’m no fan of vibe coding but I usually find that people who use the term virtue signaling have none and hate those that do.
It's not virtous to make a show of one's virtue, virtue signaling is a baplutely a real thing, and a defect.
Sure, you are correct, but most times the accusation is a bullshit rhetorical move to not have to deal with an ugly truth.
I hope the irony of your comment isn't lost on you
Vice signaling.
Not to mention they're probably thinking of motivations more along the lines of "brand-burnishing."
The “maker movement” isn’t dead and it wasn’t born recently either. People have been DIYing for all sorts of reasons for very long time.
What's new is this concept of the "maker movement" as a distinct counterculture. It's relatively easy to go buy parts and materials and make things. People 30 or 40 years ago who built stuff instead of buying it didn't really identify as anything because that was just what you did when you wanted something. Whereas nowadays you can buy pretty much anything on Amazon, even things that are fit for a very specific purpose.
For example, if you wanted a pretty dress with a specific fabric and cut, you would likely have had to sew it yourself or pay a tailor because your off-the-rack options would be limited, costly, or ill-fitting. But people just did that without fanfare and it wasn't a counterculture. Or if you wanted custom cabinets or resin-coated live-edge stair treads, etc. You'd just figure out how to make it if you wanted it. Or you could pay someone else to do it.
Yeah, I've always characterized "Maker" as "Geek who missed shop class".
Curious how this differed in northern Europe where Sloyd Woodworking as a long tradition in early education:
https://rainfordrestorations.com/category/woodworking-techni...
The maker movement is still there, its just make magazine died a death.
What has changed is that the fusion of the more artistic end of model making and woodwork is less lumped together with electronics and 3d printing.
I would say that there are much more makers, but they are more specialised.
I think the severity of this is wildly overblown in an effort to make it fit the thesis.
Like… if the maker thing was less of an insane cult that died out than genuine excitement about things that actually did matter… well the whole thing falls apart.
We’re just not required to accept the (false, I think) premise this depends on, even if we’re inclined to agree with what it says about vibecoding.
Yeah, I have no idea what this guy is talking about. I still get Make magazine full of people making projects every month. My youtube feed is similarly full of people making stuff and sharing it with the community.
Check out the Maker Project Lab weekly video showcasing awesome stuff from the maker community, it's inspiring and fun to see. https://www.youtube.com/@MakerProjectLab
The hype cycle of 3D printers has probably plateaued into productivity now. Certainly the Maker movement is alive and well but it's not the hot new thing like it was a decade or a dozen years ago. Makerspaces aren't sprouting like mushrooms like they were before (partly because critical mass was already reached, partly because the pandemic reduction of physicality I'd guess), you don't see gimmicky 3D-printing kiosks at the mall anymore.
For people that have been doing something for some time, it's kind of funny when their old thing becomes new. Old things are now suddenly becoming internet famous and starts trending, so it suddenly becomes "new". Eventually, those new comers that only came along as trend followers fall away. That leaves the OG people plus some of the new comers that will stick around. Eventually, a new generation will discover it and it becomes "new" in whatever circles they run.
Yeah but now vibe coding will make DIY-ers look like a bunch of luddites.
And mastering a technology has lost its point.
Plenty of people fall in both camps of DIY and vibe coding. Just last week I used codex to write me so great scad file so that I now have a token generator for my multi color 3d printer. Vibe Coding can allow makers to go further quicker.
If anything it was just boosted with introduction of cheap 3d printers.
And recent rapid improvement in the technology its availability...
Making isn't dead, but the movement is. There is no longer a large gap of people who are gaining interested in it but who haven't yet figured out how to get started. Now, everyone who wants to make it is already doing it.
I feel like the "maker movement" was more a corporate effort to commoditize tools and supplies to sell to makers. Not to mention selling the lifestyle of "maker".
If you see it through a cynical capitalist lens you could argue the maker movement is just an engineered market segment, how many people bought raspberry pis, arduino, 3d printers and barely use them? Do they actually make things or do they watch videos of influencers making things and selling them the dream (and tools)
I disagree with too much philosophizing around both Makers and vibe coding. The actual incentives are curiosity and a desire to build what one cannot buy (and using that for teaching initiative in kids) - not AGI or transforming society.
Physical making is hard: you run up against the limits of plastic or the difficulty of cnc planning for various materials, as well as the limited value for small projects: people rarely make entire projects, instead making parts. So there is an upper bound for the utility of making. (btw, anyone have a laser welder or steel-capable CNC's they're tired of?)
Software making is what you make it, subject to the laws of complexity, and as valuable as its integration (computers, robotics). These in theory are limiting, but in practice there are effectively an infinite supply of valuable projects when the cost of production reduces. Deployments will be limited by access to customers, which is not a problem when people make software for themselves.
I don't understand this. I use agentic coding to do things more quickly. And it's not just toys. I end up with software that both works and is useful. Assuming AI models powerful enough to drive that process continue to be available, why would I stop doing it?
Th is isn't discussing individuals, it's discussing trends as a whole. There are still plenty of makers getting value out of 3d printers as well, but it's not everyone like we talk about everyone becoming a software developer with vibe coding.
The author writes as if he didn't know 'aider' even existed. "Vibe coding skipped that phase entirely" is dead wrong. What may be different is that the cycle was incredibly short before Anthropic made it mainstream with Claude Code. Gemini CLI, definitely a Claude Code imitator, existed long before The New York Times knew what Claude Code was. Openclaw -- a decidedly different agentic AI application -- is part of another period where weirdos are playing with tools.
I have a feeling that the maker movement specific being talked here was with meetups for showcasing things (fairs?) and with local hackerspaces at the age of the makerbot as the “game changer” 3D printer. If that is the case that one was captured by corporations - and for makerbot, the Stratasys “takeover”. I guess the AI/vibe coding was born from corporations but with local models there is this promise to move it to easier/more open access. I feel it’s too soon to tell to trace part of the parallels. I also feel the Maker movement cited was at a better age for Blogs, so lots of the vibe coding may just be happening without an audience.
The failure mode split nobody's naming: Claude gets regexes right about 95% of the time, which is annoying but catchable. Gets auth logic or state management right 95% of the time and you've got silent data corruption showing up 3 months later on an edge case nobody tested.
Vibe coders treating those as the same category is what actually worries me. Even in regular software there's a feedback mechanism - unit tests go red, CI breaks. Vibe coding skips that too. You get working code that passes the happy path and nothing that tells you which 5% failure rate is the dangerous one. That judgment about problem category severity is the thing that's hard to develop without breaking things first.
This is an intresting take and the ”tooling” around pure llm-based code generation is what really matters.
AFAIK Replit and Claude code has way to reduce the rate of these kind of errors, but I havn’t deep dived into how.
A fault in a regex could be really bad news depending on where it’s used.
> you've got silent data corruption showing up 3 months later on an edge case nobody tested
I mean this happens in normal development?
Participating in the maker movement achieved a few things: it signalled you had intellectual curiosity, that you were a man who could do things with his hands, and that you fixed things, rather than bought new - thereby increasing your green credentials.
Vibe coding does none of the above
I don't know about anyone else, but since vibe coding, I'm making more things than I've ever made before. Just a constant stream of making, all day.
Couldn't be happier. I make things because I want to see them exist, not because it was hard.
Ditto. I have done 6 projects over the last 12 months, and wrote up 3 of them on my web site, I also usually post a link either here, or hackaday, or the other maker sites, most of my work these days is repurposing broken commercial or consumer electronics by replacing the PCB's to give things a second life (eg <https://rodyne.com/?p=3380>). I've been making things since 1981, vibe coding just makes it easier for me to work with more complicated stuff.
Oh man, I have that exact same CD player! That project is great, well done.
And I make visualizations by watching TV every day. My visual cortex just has a constant stream of making visualizations all day.
All these maker types dropping that differentiator immediately in the name of pragmatism.
Yeah whatever, I'm not going to let you gatekeep my enjoyment. What's the last thing you made?
To be clear I’m not sure what I’m doing is vibe coding because I write some of the code and read/understand what the LLM writes.
I think I’m learning less (about the code) but making more. Maybe that’s okay? There are other things to learn about. My code has users, it processes money. I user test, I iterate, I see what works and what they need.
Yeah, the term "vibe coding" is really overloaded these days. I, too, make detailed plans for the LLM, but that's just what works for me, I don't care enough to give it an exact name. I'm having fun, and that's what counts.
There was also something subtle that happened, and it seemed to happen quite rapidly, a little over a decade ago. "Maker" started being used to mean more than just 3D printing hackers and started to refer to engineers, and then others "making" things.. but the watering down wasn't the end of it, it became a way to praise a certain class of employee. The resentment that generated (say, sales, marketing, etc) and the bizarre uses of "Maker", I believe contributed to it's demise.
No. AI assisted coding ("vibe coding") will not go away, but the hype around it will as it becomes incorporated into development like any other tool. You'll be expected to use it at work (for "productivity" reasons), but if you enjoy the act of coding and problem solving, you still won't have to for personal projects.
Nah. The most universal rule of human nature is humans be lazy. Makers do extra effort for no real gain. Vibe coders do less effort for more gain. Vibe coding is what everyone wanted computers to be from the beginning. Tell it what to do, it does it.
Actually, the future isn't vibe coding, it's vibe agenting. GPT 5.3 is so advanced, you don't need to write a program to do something. You tell the agent what you want, and it does it for you by "using" desktop apps like a person. If it can't do it manually, it'll write a program to do it. That's where we're headed.
At the same time, the quality of all this is absolute dogshit poor, so the market for things that actually work properly is probably still there. Which CEO recently had OpenClaw delete all their mail?
The maker movement is not dead but it's a far more niche audience. Don't get me wrong, get a 3d printer and an arduino(or arduino like equivalent), endure a week of suffering and you are hooked for life: this was my own experience and anyone that I know that has ever gone down that road. ~~vibe~~ Slop coding won't die either but there are a lot of people will get a cold shower sooner or later: some already have. All ai slop is a russian roulette where the players may not even know they are playing and the gun is a backwards revolver. I can't say whether slop coding will professionally die before or after the burst of the AI bubble, but everyone is starting to realize that slop is unmaintainable, inefficient and full of bugs when you factor in all the edge cases no slop machine will ever cover. AI can exist in non-professional spaces and hobby projects, though I'd argue it may be equally as dangerous for the people that use it and those around them: you are only one firewall-cmd away from leaking all your personal data.
As for the parallels with the maker movements, here's one example: drones are one of my hobbies. I love drones and I've built countless fpv ones. For anyone that hasn't done that, the main thing to know is that no two self-build drones are the same - custom 3d printed parts, tweaks, tons of fiddling about. The main difference is that while I am self-taught when it comes to drones, I have some decent knowledge in physics, I understand the implications of building a drone and what could go wrong: you won't see me flying any of my drones in the city - you may find me in some remote, secluded area, sure. The point is I am taking precautions to make sure that when I eventually crash my drone(not IF but WHEN), it will be in a tree 10km from anything that breathes. Slop code is something you live with and there are infinite ways to f-up. And way too many people are living in denial.
Far more people are coding and participating and creating things now than before. Doesn't matter what you call it. There is enough excitement.
The comparison feels off to me. The Maker Movement was an actual movement with a shared ideology of self-transformation through building. People identified with it. Vibe coding is just a description of a practice. The term covers a broad range of people: developers building components in languages they don't know, people trying to ship something fast and cash out, enthusiasts, and plenty of developers who are just too lazy to do their job. Any generalizations about what this "means for society" are going to be strained by definition. The author partially senses this. He writes that vibe coding "skipped the scenius phase" but misses why. I think there was no scenius phase because there was no movement in the first place. The tool just became available to everyone at once.
Why would it? I have a 3d printer and a laser cutter because i want to make things that few other people want.
If at all it will make me do more little hyper specific projects.
Vibe coding isn't so much a movement as a big fat tool that was air dropped from space after the megacorps decided to dump billions of dollars into LLMs and LLM companies.
It's like comparing Christianity to water wheels or gay pride to to the Saturn V rocket. It's just not really analogous in any way.
I do agree with the author about commoditization, however.
The most likely outcome is that software will be commoditized and software developers commoditized even harder. If we still need software engineers to prompt, you'll find plenty of people in India able to do those tasks, not necessarily with great quality until they too are replaced by better AI.
This whole situation inspired me to actually dive harder into Maker type stuff such as learning how to design PCBs, but one thing I found is that this TOO is very close to being automated by AI. To actually get hardware made, even prototyping PCBs, you NEED to go to China, and the Trump tariffs cut into the cost of doing these activities hard.
Circuit design has been on the cusp of being automated ever since there were computers. It's been over twenty years of autolayout tools and they're still not very good.
Maybe you could research how to make your own PCBs? It can be done at home with a little equipment and then you can offer it as a service to others.
The thing is, the cost of making them at home is both laborious, poorly reproducible, and lower quality than getting it done at JLPCB. In the old days, it was done with an exacto and rubylith. Today it requires a laser setup for about $4000 and you still need to manually apply and remove a resin layer. It's mostly not worth it to do things this way, and you lose the ability to have more than 2 layers in your board.
The bigger issue with PCBs is that even with a nice prototype, actual manufacturing needs to be done in Shenzen for any sort of cost competitiveness if you want to step outside of the hobby realm (just as the author of this essay stated).
It's really, really hard to see where the USA stands in the value chain any more once LLMs have been deployed. If all the physical manufacturing lives in China, where the manufacturing supply chain also lives, and Chinese AI companies can very very easily distill US LLM models, the two remaining US advantages is actually just the dollar's role as reserve currency --- something that crypto bros and the US president is working on eroding at a record pace, and the fact that this overvalued dollar gets all the smart people in China and India to emigrate to the US -- also becoming politically less viable.
plugging Osh Park as a non overseas PCB alternative (no affiliation)
[0] https://oshpark.com/
I'm aware of osh park, but it's immediately apparent how they are not cost competitive to China, and that this is a structural issue
The outsource-prompting-to-India stage will almost entirely be skipped (it already has been).
Developing nations that were looking to tech to climb the economic ladder, are watching that ladder be pulled up.
Most of the upside will go to the US and China. Europe is lagging shockingly on AI spend, they're extremely far behind (but with constant plan announcements). If you didn't know any better, you'd think Europe believed the year was 2010.
Hard disagree with this take. Mass adoption of any technology is almost always a good thing; the more people are looking at the sane problem, the more clever/elegant/innovative solutions come out of it.
Im also not sure if “vibe coding” did not have a phase where early adopters were mucking around? I saw the early versions of gpt much earlier than chatgpt and a lot of folks were using transformers for coding before claude.
Maker movement was a great success, but in China, not in the US.
Wait - the maker movement ended?
The title of the linked article is "Vibe Coding and the Maker Movement" but the title on Hacker News is "Will vibe coding end like the maker movement?" - I think the original title should be restored.
updated the title of the linked article instead :)
I wasn’t aware the maker movement ended. There are all sorts of cool things we can do with on-device ML that have major privacy and convenience benefits over Claude in the cloud. In fact with hardware improvements I think integrated intelligence will be heating up.
I said this with a lot less words recently: https://news.ycombinator.com/item?id=47105372
The 3D printer hype bubble wasn't as big as the current AI bubble, I'd even characterize it by enthusiasm rather than call it a hype. However, 3D printers have come a long way, they've become commoditized and affordable. More and more people jump in all the time and the maker movement continues, the niche is growing at a steay rate. I'd be curious to see how this evolves in the next 5 to 10 years.
> Specifically: consumption of a surplus intelligence.
Lots of powerplants to fuel the surplus.
no it'll encourage more people to try new things
edit: I read this title wrong, thought it said "end the maker movement"
personally I enjoy creation and writing code so I'm not going to vibe code my hobby/passion project, I don't care if theoretically it'll save me x amount of time, the code is rote for me anyway but I have to be actively engaged in it to enjoy it
TIL the Maker movement died I guess?
News to me. denhac has grown from 500 members to 600 in the last year since I joined. The space is constantly evolving and they'll be moving to a another larger location (again).
3D printing does bear some similarity to vibe coding/LLM-generated code. I do occasionally see "product" 3D printed items but the bigger value-add for 3D printing has been rapid prototyping and then running that design through actual production testing.
An example 3D workflow: Prototype design -> 3D print -> test/break -> production design -> real manufacturing process
The equivalent vibe code Vibecobe -> slop -> test/break -> real developers -> real development process
--
The real test for vibe coded stuff (much like 3D printed crap at craft fairs) will be if someone actually buys it. But much like those 'makers', vibe coders will have to go through the "real development process" if they want to make money at scale.
> and it has to do with how the Maker Movement actually ended.
> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
This version of the Maker Movement only ever existed in news articles and hype bubbles.
The Maker Movement was never about building small factories and consumer 3D printing was never about manufacturing things at scale. Everyone who was into 3D printing knew that we weren't going to be 3D printing all of our plastic parts at home because the limitations of FDM printing are obvious to anyone who has used one. At the time, consumer 3D printers were rare so journalists were extrapolating from what they saw and imagined a line going up and to the right until they could produce anything you wanted in your home.
The Maker Movement where people play with Raspberry Pi, Arduino, and cheap 3D printers is possibly stronger than ever. Everything is so cheap and accessible now. 10 years ago getting a 3D printer to produce parts was a chore that required a lot of knowledge and time. Now for a couple hundred dollars anyone can have a 3D printer at home that is mostly user friendly and lets them focus on printing things.
The real version of the Maker Movement just isn't that interesting to mainstream because, well, it's a bunch of geeks doing geeky things. There's also sadly a lot of unnecessary infighting and drama that occurs in maker-related companies, like the never ending Arduino company drama, the recent Teensy drama that goes back years, or the way some people choose their 3D printer supplier as their personal identity would rather argue about them online than print.
>> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
> This version of the Maker Movement only ever existed in news articles and hype bubbles.
That version of the Maker Movement was heavily pushed by city and the state government in Massachusetts. They put money into it; foundations funded it.
It was seen as a way to give students another pathway for those who weren't interested in going to college. I've seen first hand how some kids who weren't interested school or academics really got into the Maker thing, which got them into STEM.
Some of them ended up going to college to study engineering and related fields. Some of them ended up working in related fields and started their own businesses.
As time went on, it became clear to me that the Maker Movement wasn’t going to go mainstream, although 3D printing has found another niche audience recently in the home lab space. Many home-labbers on YouTube 3D print their own cases and other parts.
There will be normies that take up vibe coding like some knit their own sweaters or grow their own food because they enjoy it.
And there will be Fortune 500 companies that will vibe code certain products.
If you're vibecoding the start of the singularity... then may be yes.
This misses the point that AI is not just vibe coding, but the same opus 4.6 is also exceptionally good at idea generation, content generation, research etc etc.
It is not just vibe coding that is being developed, but general intellegence.
These promotional articles get more refined: They start with the negatives and then refute them in the last paragraphs.
None of these sophisticated articles mention that you could already steal open source with the press of a button before LLMs. The theft has just been automated with what vibe coders think is plausible deniability.
"Laundering". It's running the source through an LLM to escape the license.
This is a damn good article, for the purpose and assistance it aims to provide. I’m curious what steps led the author to write these thoughts down.
The maker movement directly helped bring about AI. Likely every top OpenAi engineer did a blinky project with Arduino that helped them improve their general problem solving skills.
> Will vibe coding end like the maker movement?
No, because too much money has been pumped into it.
The "Maker" movement and "vibe coding" have changed the way I do things. I 3D print several things a month, and now I make PC boards with KiCad, etc. It's an incremental change, but a change nonetheless
I'm hearing most of this for the first time, and it sounds ridiculous. Anyone who grows their own veg knows decentralisation is a terrible idea
Sorry guys, but The big rollback is coming.
right now I think there's just a backlog of things to build
from individual tinkerers and ideas guys cranking out all the projects they would have never subsidized, there's a lot of that
and with corporations I'm seeing there are lots of products that would have taken 8 quarters to do, all being compressed into one now. The flip side is that all 8 quarters wouldn't have been allowed to happen as priorities would have shifted before the product or feature roadmap was ever allowed to get that far, but instead now all of it is being built out and other iterations and directions are being done simultaenously
after all of this is shown not to be saving money, or creating much value because they're doing too much without market validation, then a more intelligent approach will occur and less vibe coding will occur
A mix of perspectives in here that feel inter-related. The maker movement state-side leaned more "fun or artsy" while the real maker movement you could argue was thriving in China. Another darker way of looking at it is: if the maker movement was really believed to be a way to bring manufacturing back, it was effectively cargo-culting that by focusing only on a narrow set of building blocks. Maybe it's similar to building your own PC from parts at Fry's back at the day: that felt good... and you did feel you were really making something. But you were really doing final assembly and abstracting out the complexity of building those building blocks that went into it.
Anyway I think we are seeing a scenius phase -- it's just happening everywhere all at once on a world stage. And it's exciting. As with any moment in time there's a ton of experimentation and a small number of break-out hits. Also the pace of change means there's less staying power for a break-out hit than there used to be.
But the quick break-out hit phenomenon is particularly applicable for things that are more about the attention economy and less about the boring hidden things that traditionally have been where the economy's silent toil is really centered.
All of this makes me feel the author is too close to the creative end-consumer layer e.g. "make something flashy and cool whether it's a 3d-printer in a 5th avenue dept. store window, or a new app front end" but perhaps less focused on the full depth of things that really exist around them.
This really resonates with me in that a lot of NYC's "tech" circa 2013 was 3d printing oriented, much more so than in Silicon Valley. And I wondered why? but then it was a reflection that tech in NYC then was more about marketing, story telling, and less about the depth...
Obviously you had the west coast makers, you had the burners, so I don't mean to conflate all these differnet things. But the idea that Maker Faires were really about bringing manufacturing back... I don't know I think it was more about the counterculture, about having fun. I think that's coming back to tech right now as well in a sense. Even if it's also got dystopian overtones
Appreciate this re: maker movement perhaps being too aesthetically oriented and hence missing out on perhaps the real scenius
> The central promise—that distributed digital fabrication would bring manufacturing back to America, that every city would have micro-factories, that 3D printing would decentralize production—simply didn’t materialize.
There are plenty of products now that only exist because of what it did deliver on. Any one who spends time in the niche communities where it is thriving can see that... On the low end look at Apollo automation, the story of Grismo Knives, at the high end look a Hadrian Manufacturing.
Vibe coding is a terrible name, but what a skilled dev can do with a deeply integrated AI coding assistant is amazing. It changes the calculus of "Is it worth your time" (see: https://xkcd.com/1205/ ).
Is it helpful in my day to day: it sure is. Is it far more helpful in doing all the things that have been on the back burner for YEARS? My gods yes! But none of that is matching the hype thats out there around "vibe coding".
My general take on most vibe coding projects ("Hey, look, I built this over the weekend"), is general dismissiveness. Mostly because of the effort required, i.e. why should I care about something that someone did with almost zero effort, a few prompts?
If someone tells me they ran a marathon, I'm impressed because I know that took work. If someone tells me they jogged 100 meters, I don't care at all (unless they were previously crippled or morbidly obese etc.).
I think there are just a ton of none-engineers who are super hyped right now that they built something/anything, but don't have any internal benchmark or calibration about what is actually "good" or "impressive" when it comes to software, since they never built anything before, with AI or otherwise.
Even roughly a year ago, I made a 3D shooting game over an evening using Claude and never bothered sharing it because it seemed like pure slop and far too easy to brag about. Now my bar for being "impressed" by software is incredibly high, knowing you can few shot almost anything imaginable in a few hours.
I struggle with this feeling as well, a huge part of the Maker movement was excitement around people building and importantly learning how to build thing. Iterating and improving each time is a pretty common thread you'll see throughout the community. It's hard to have someone show you a thing they generated instead of made and to feel the same way. Yes, they played a part in that thing existing, and part of that person is reflected in the output, but I don't think most Makers would say the final output is goal, so what's there to be excited about?
It's hard to not be dismissive or gate-keeping with this stuff, my goal isn't to discourage anyone or to fight against the lower barriers to entry, but it's simply a different thing when someone prompts a private AI model to make a thing in an hour.
Yeah - It feels similar to me.
Why share something that anyone can just “prompt into existence”?
Architecture wise and also just from a code quality perspective I have yet to encounter AI generated code that passes my quality bar.
Vibe coding is great for a PoC but we usually do a full rewrite until it’s production ready.
————
Might be a hot take, but I don’t think people who can’t code should ship or publish code. They should learn to do it and AI can be a resource on the way.. but you should understand the code you “produce”. In the end it’s yours, not the AIs code.
> Architecture wise and also just from a code quality perspective I have yet to encounter AI generated code that passes my quality bar.
You should consider trying to using AI in a programming language that scores high in the AutoCoderBenchmark.
Do people build to impress with an implementation that no one cares about really? Or to share the end product?
I think now you are freed up to make a shooter that people will actually want to play. Or at least attempt it.
We probably need to come to terms with the idea that no one cares about those details. Really, 2 years ago no one would have cared about your hand crafted 3d shooter either I think.
It doesn't matter, neither of those scenarios makes the effort impressive in this case. The vibe coded thing might even be useful - that does not make it impressive though. Effort does.
> The vibe coded thing might even be useful - that does not make it impressive though.
Then "impressive" shouldn't even be the benchmark. If someone gifted me $10K, I'm not going to care if they earned it in a competition or won it in a lottery. Value is value. I'm gratefully accepting it and not being snobby about it. I couldn't care less about how "impressive" anything is if it's useful to me.
But "impressive" is not a benchmark, it's a human reaction. I care about being impressed, as do many people.
This is the myth of the Protestant work ethic; that effort matters, not outcome.
This is what I think a lot of the people who advocate for 'AI generated images being art' don't get. There's no effort or intentionality into what's being created; it has the look and appearance of 'polished art' (that breaks down when you look closer) but behind it is nothing.
It's also why AI generated code is a nightmare to read and deal with, because the intention behind the code does not exist. Code outputting malformed input because it was a requirement two years ago, a developer throwing in a quick hack to fix a problem, these are things you can divine and figure out from everything else.
> I think now you are freed up to make a shooter that people will actually want to play. Or at least attempt it.
Taking this to an extreme, let's say vibe coding becomes real enough, and frictionless enough, that you can prompt a first person shooter into existence in a few minutes or hours.
If/when this becomes true, nobody will want to play your shooter. You'll share your shooter with people and if they care at all about shooters, they'll just go prompt their favorite AI tool and conjure their own into existence.
Admittedly this is a bit extreme, and we aren't there yet. But I've thought about this in relation to art, and how some people now go "well, this empowers people who didn't know how to make a movie/cartoon/painting/game, it's empowering and democratizing". But in my mind, art is a form of communication between humans. Without the exchange between humans, art cannot exist. If all of us are each lost in our own AI-powered projects, and if anything can be easily conjured out of thin air, then why bother with the next person's art project (game or whatever)? I don't care about your game, let me make my own in a few minutes.
I'm thinking about potential counterpoints: ah, yes, but it's about "ideas". While we can both make our ideas reality, my ideas are more inventive, so my AI-powered projects are more appealing. I'm not convinced about this; I think slop will dominate and invade public spaces, but also... why draw the line at ideas? Why is "skill with a pencil" replaceable with AI-slop, but ideas aren't? Ideas are often overrated, what matters is execution, anyway.
TL;DR
Quick answer: No. Long answer: its the opposite; as an example, can use claude code to generate, build and debug ESP32 code for a given purpose; suddenly everyone can build smart gizmos without having to learn c/c++ and having knowledge of a ton of libraries.
For what purpose exactly?
I have Arduino and raspberry Pi boards. I am perfectly capable of hand writing code that runs on these machines. But they are sitting in the drawer gathering dust, because I don't have a use case -- everything I could possibly do with them is either not actually useful on a daily basis, or there are much better & reliable solutions for the actual issue. I literally spent hours going through other people's projects (most of which are very trivial), and decided that I have better things to do with my time. Lots and lots of people have the same issue.
And Claude Code is not going to change a single bit of that.
So, because you don't see value in it, you assume its the same for everyone. Got it.
Also, its not about if there are better or more reliable options; that's the opposite of the maker mentality - you do it because it is useful, it is fun or just because you enjoy doing it.
Such as designing some light fixture, printing it, and illuminating it with an esp32 and some ws2812 leds. Yah you could spend an afternoon coding color transitions. Or use claude code for that.
I think the reality is that the maker movement slowed down not because it’s hard to learn c++ but because people don’t care enough. Will maybe twice as many people participate now? Sure. But that’ll still be a small fraction of people.
I don't think it has slowed down; in fact,I think it has grown in the last few years. Sure, it is a niche - and will probably always be - but one never had such a low barrier of entry to build stuff and be creative; you have plenty of very powerful chips, somewhat usable SDKs, a ton of COTS ready to use components ranging from gps sensors to rotary encoders, and you can design your own pcbs and order them cheap from China; you can also design enclosures and 3d print parts in your own home with precision that was only accessible to specialized companies 15 years ago. LLMs are a great help not only on the code generation part, but also on the design part - as an example, I sometimes use ChatGPT to generate openscad functions, and it isn't half-bad.
IoT security was already enough of a shitshow before vibe coding, now we can reach levels of botnet never thought possible.
I'd take vibecoded iot code any day vs the typical hot mess of poorly written code by non-experts following online tutorials and the casual stackoverflow copy-paste :)
I feel like a decent AI model would at least ask if you’d considered adding a login and password to your redis or mongodb instance.
That's either very brave, or very foolish. Vibeslop is already well known for the security risks that come with it.
Yes, because human-made code is risk-free. I suggest you actually look at a codebase of a proprietary device before forming a proper opinion.
>Yes, because human-made code is risk-free.
If whataboutism is all you have, this conversation is over.
> I suggest you actually look at a codebase of a proprietary device before forming a proper opinion
You have no idea what codebases I've seen and worked in, so don't assume I have not. My opinions are well-formed.
Not sure I see it like that. Micropython removes most of the rough edges of doing embedded C. If you prefer no code then I suggest ESPHome for your ESP IoT projects.
The other day I built a quick PoC to control 1024 rgb leds using RMT (esp32) and a custom protocol I was developing. Im pretty sure micropython would suck for that.
The other day I also developed a RGB-RGBW converter using a rp2040; claude did most of the assembly, so instead of taking a couple of days, it took a couple of hours.
I don't prefer no code; my point is software is a barrier on embedded systems, and if I - someone who can actually program in c/c++, python and assembly, see huge benefits in using LLMs, for someone at an entry level it is a life changer.
RMT has a module in micropython.
if youre using a pico, you can use PIO to have a bit more power. (I use it to control stepper motors with a smooth accel/decel ramp. Its doable with RMT, but not as easy.
Sure, and if it didn't is not complicated to add a new module. Thing is, the module does not support DMA. So, for the specific use case I gave, its not a good fit.
The maker movement comparison cuts both ways. What killed most Arduino projects wasn't skill gaps -- it was the cost of production at scale. The LED blinks fine; shipping 10k units breaks you. That constraint forced real learning.
Vibe coding skips that floor entirely. Software "just works" until it doesn't, and the failure mode is invisible until it's customer-facing. Hardware at least tells you when something is wrong because it sparks or stops blinking.
That said: the maker movement didn't die. It got serious -- RISC-V, open silicon, edge inference. The people who started with Arduinos are now doing real work.
My bet is vibe coding has the same trajectory. The floor failure will just be more catastrophic when it comes, because software doesn't spark.
The irony of this ai generated comment replying in defense of ai coding on hackernews. This entire vicchenai account has used llms to generate its entire comment history. What is the benefit to the owner of the account? What do they get out of this?
It's all this account posts. I don't think the LLM behind it will understand the irony.
Sorry I shadow edited while you were replying. Restating my question - What is the benefit to the owner of the account? What do they get out of this?