The standard makes sense: models work much better when devices expose standardized, machine-readable interfaces.
But as far as I can tell, this technical "standard" isn't actually public yet (you have to apply for access to even see or implement it.) Anthropic says they plan to open source it later.
Quite a departure from the way foundational hardware standards like USB and CAN were developed. You shouldn't need permission to read a standard.
MCP was a bucket of Not Invented Here nonsense, that ignored years of protocol design. It was incredibly jank and hard to run at any scale, for years and years.
They finally looked at how other protocols do things, and made something that behaves in recent versions. But it's hard as heck to take this company at all seriously. The don't really care about ecosystems (AGENTS.md), they don't seem to know think or care much about protocols until they have to (MCP's incredibly long redemption ark). The vibes are all off.
Maybe they avoid laying their own pitfalls this time. Maybe it's better. It'd be nice to start seeing some kind of cause to trust this company as vaguely capable computer-using people. But so far that hasn't been the case.
I think I agree. I find it a little bit annoying that they do not start by a survey of the existing landscape, discuss the issues and what works well, and spend the effort to show that they can indeed to be trusted as the authority behind such a protocol expected to become standard. For MCP, it started very messy, but from what I understand it was developed by a small team within the company working on internal tooling, for their own use case, I think it’s reasonable to expect something a bit awkward, I don’t think they expected its success
It's a bit of both for Anthropic I think, sometimes cutting edge and quite interesting or just good improvements, sometimes ignoring best practices either recently established or known for decades. Obvious to see where the smart people are in high places at the company.
To me, this seems like OPC UA / SiLA but instead of being software <-> machine semantics/control it's AI <-> machine semantics/control. Or in simpler terms, an AI-facing hardware abstraction / device-description standard.
MHS can describe capabilites, metadata, safety limits, as well as provide read/write control and discovery. Things like "can measure temperature", "arm weighs X kg", "never exceed X RPM", that agents can easily understand. (as opposed to that being buried in a datasheet somewhere, or having to be included in the prompt)
So far Anthropic shows remarkable taste in research, engineering, and product. Dario the ideologist attracts the most pure-minded talent in the industry. It indeed looks like Anthropic would be unchallenged for the foreseeable future. It'll be very interesting to see its downfall in 5-20 years.
To actually add something to the discussion though: I guess getting LLMs to control robots is cool, but would potentially have more severe consequences than pure software since it interacts more with the physical world
There are MANY packages in this space: Labs love to invent their own versions powered by the hubris of grad students. Anyway a random sampling of some I’ve come across is:
The general problem is (1) i have a heterogeneous mix of hardware that speaks a bunch of different protocols from SCPI serial commands to VISA over USB, to bizarre proprietary things and (2) I want to be able to talk to it from one central computer and (3) ideally have some level of standardisation or abstraction so I can express an experiment like move <stage> from <x> to <y> in <n> steps and at each step fire <laser> and measure <signal> while logging <temperature>.
Anthropic seem to be creating the n+1 version of those packages and presumably doing some harness work to make Claude good at using it.
It's hard to make LLMs read the manual for an invented language and have them improvise on the spot(1-shot). An established language or a command set that can be included in the training set to be used off top of their head is a lot more reliable and efficient.
The caveat is that actual utility of this particular command set isn't clear yet. Or how many LLM labs will find it worthwhile.
More like MCP for robotics. IMO they are better off getting the robots to use existing human UIs than trying to get hardware manufacturers to play ball.
In the context of lab hardware there’s a ton of proprietary software and barriers to automating things. I think this is less about how to communicate, and more guaranteeing that “yes, this piece of hardware can interface with an agent” and is meant to do so. Kind of like using MCP vs letting your agent make raw HTTP requests
It seems more like a basic instruction set, that will then be translated to something actionable for each different device. Seems like most of the work then will be in developing the drivers for whatever devices you want the LLM to access.
The standard makes sense: models work much better when devices expose standardized, machine-readable interfaces.
But as far as I can tell, this technical "standard" isn't actually public yet (you have to apply for access to even see or implement it.) Anthropic says they plan to open source it later.
Quite a departure from the way foundational hardware standards like USB and CAN were developed. You shouldn't need permission to read a standard.
As far as I can tell is these standards (MCP/MHS/etc) are just semi obvious tool inferfaces that Anthropic uses as training scenarios.
It’s actually really cool, and not just for AI. That should make it easy to automate some processes with simple scripts.
Nitpick: it’s annoying that they add Model to those acronyms, for what seems like a fairly universal software interface
How is this different from tool calls? Or rather, MCP?
Sounds like PyLabRobot:
https://docs.pylabrobot.org/stable/
MCP was a bucket of Not Invented Here nonsense, that ignored years of protocol design. It was incredibly jank and hard to run at any scale, for years and years.
They finally looked at how other protocols do things, and made something that behaves in recent versions. But it's hard as heck to take this company at all seriously. The don't really care about ecosystems (AGENTS.md), they don't seem to know think or care much about protocols until they have to (MCP's incredibly long redemption ark). The vibes are all off.
Maybe they avoid laying their own pitfalls this time. Maybe it's better. It'd be nice to start seeing some kind of cause to trust this company as vaguely capable computer-using people. But so far that hasn't been the case.
I think I agree. I find it a little bit annoying that they do not start by a survey of the existing landscape, discuss the issues and what works well, and spend the effort to show that they can indeed to be trusted as the authority behind such a protocol expected to become standard. For MCP, it started very messy, but from what I understand it was developed by a small team within the company working on internal tooling, for their own use case, I think it’s reasonable to expect something a bit awkward, I don’t think they expected its success
It's a bit of both for Anthropic I think, sometimes cutting edge and quite interesting or just good improvements, sometimes ignoring best practices either recently established or known for decades. Obvious to see where the smart people are in high places at the company.
How does this compare to ROS 2? Roughly the same goals.
To me, this seems like OPC UA / SiLA but instead of being software <-> machine semantics/control it's AI <-> machine semantics/control. Or in simpler terms, an AI-facing hardware abstraction / device-description standard.
This is how I understand it:
Agent <-> MCP/CLI/code <-> MHS <-> vendor API/SCPI/OPC UA/ROS/etc <-> CAN/Modbus/USB/etc <-> hardware
MHS can describe capabilites, metadata, safety limits, as well as provide read/write control and discovery. Things like "can measure temperature", "arm weighs X kg", "never exceed X RPM", that agents can easily understand. (as opposed to that being buried in a datasheet somewhere, or having to be included in the prompt)
Also see: https://en.wikipedia.org/wiki/OPC_Unified_Architecture, https://en.wikipedia.org/wiki/Standardization_in_Lab_Automat..., https://xkcd.com/927/
So far Anthropic shows remarkable taste in research, engineering, and product. Dario the ideologist attracts the most pure-minded talent in the industry. It indeed looks like Anthropic would be unchallenged for the foreseeable future. It'll be very interesting to see its downfall in 5-20 years.
5-20 years?
Have you seen the financials of the AI companies?
OAI and ANT are private, so I sure haven‘t seen their books.
Hardware-speech synthesis breakdown and decline
Are they in a position to define any kind of standards?
"standard" is doing a lot of work here
https://xkcd.com/927/
To actually add something to the discussion though: I guess getting LLMs to control robots is cool, but would potentially have more severe consequences than pure software since it interacts more with the physical world
I don't want to be that guy but did they invent bluetooth for ai? Like what is MHS actually? I read it twice and still don't get it
There are MANY packages in this space: Labs love to invent their own versions powered by the hubris of grad students. Anyway a random sampling of some I’ve come across is:
The general problem is (1) i have a heterogeneous mix of hardware that speaks a bunch of different protocols from SCPI serial commands to VISA over USB, to bizarre proprietary things and (2) I want to be able to talk to it from one central computer and (3) ideally have some level of standardisation or abstraction so I can express an experiment like move <stage> from <x> to <y> in <n> steps and at each step fire <laser> and measure <signal> while logging <temperature>.Anthropic seem to be creating the n+1 version of those packages and presumably doing some harness work to make Claude good at using it.
It's hard to make LLMs read the manual for an invented language and have them improvise on the spot(1-shot). An established language or a command set that can be included in the training set to be used off top of their head is a lot more reliable and efficient.
The caveat is that actual utility of this particular command set isn't clear yet. Or how many LLM labs will find it worthwhile.
More like MCP for robotics. IMO they are better off getting the robots to use existing human UIs than trying to get hardware manufacturers to play ball.
Oh I see, yeah I guess this assumes manufacturers will just adopt this standard universally. Clears things a bit!
What is the difference of MHS to MCP when it comes to features?
The whole text reads like everything is just a gRPC call that could've also been implemented with an MCP based wrapper.
That 2 trillion dollar valuation ain't gonna make itself.
In the context of lab hardware there’s a ton of proprietary software and barriers to automating things. I think this is less about how to communicate, and more guaranteeing that “yes, this piece of hardware can interface with an agent” and is meant to do so. Kind of like using MCP vs letting your agent make raw HTTP requests
It seems more like a basic instruction set, that will then be translated to something actionable for each different device. Seems like most of the work then will be in developing the drivers for whatever devices you want the LLM to access.
Yes, it turns the hardware driver problem into a translation problem (translate the hardware manual/datasheet into this protocol.)
Guess what's really good/quick at translating things?