First time hitting the front page. Definitely made my day as a long time lurker!
When I look at the reindustrialization efforts, the bottleneck keeps showing up in the machines themselves (and the machines that make those machines). The question then shifts from “we need more factories” or "we need robots that run the factories", to the capex, precision components, process knowledge, and industrial base that make modern manufacturing possible.
Curious what people see as the highest-leverage places to tackle.
I am old so I grew up with the panic that the USA does not make the most steel anymore. At the time I thought: wow: we're probably way behind in brick and concrete too.
We still manufacture the most rockets, the most satellites, the most jets, the most missiles etc. I think it is easier to relearn or reinvent the machines that build the machines. Being cutting edge is hard. Tesla essentially had to go back to assembly lines, a technique everyone said Americans can't do anymore and they invented new ways of assembling autos (I'm think building in pieces, not off the frame) that many companies imitated.
A notable milestone was the heavy press program --- but research where Tesla bought its Gigapress and where the now largest/heaviest was recently brought online.
I like this perspective. I think right now there's a lot of exuberance of reindustrializing _everything_ but perhaps the highest ROI is to focus on what America does best, vs. trying to reinvent everything as if we're an island of our own.
Your example kinda belies your thesis. Tesla is producing a substantially worse product than its Chinese competitors and surviving only thanks to protectionism.
Can America build the precision machine parts needed to manufacture useful robots ?
Browsing Michelle Suns other articles gives a great insight into how un-viable it is for American manufacturing to catch up with Chinese manufacturing.
There are pretty massive benefits of scale / density in Shenzen to support every aspect of manufacturing, which are similar to the benefits of VC funding scale in Silicon Valley.
Its hard to reproduce either ecosystem, and impossible to do it quickly.
Even if we use a self-improvement loop that uses AI to train industrial robots to run machine tools, thats going to take some time - maybe more than a decade, even if we hit AGI / ASI in the next 5 years.
and the race to AGI / ASI is already being throttled by compute, which is being limited by the rate at which we can build datacenters and get power sources for them - some GPUs are sitting in warehouses, they might even lose half their value before they get installed.
Perhaps a better outcome for everyone is a detente, a re-invigoration of the free trade cooperation/competition that gave us this incredible growth and prosperity the past 40 years, with its intimately co-mingled supply chains ?
Its probable that engineers in Shenzen can innovate faster in using AI to run robots to run machine tools to manufacture machine tools and parts for robots, than America can. Their AI chips and LLM models are good enough, only getting better.
exactly re your last point. While there's a lot of opportunities to optimize factories with AI, Shenzhen factories can do the same with agents and cheaper LLMs.
My guess is that the US (and western countries) can likely build a decent supply base for price-insensitive verticals like defense, through a mix of venture capital support and govt budget. And it's still worth doing for AI / physical AI sovereignty.
I guess the counter-argument would be the rapid innovation of SpaceX engines and catching both starship stages and the scaling up of Tesla car and robot production.
Not to mention the very successful Artemis Moon loop mission - clearly America _can_ innovate in manufacturing / physical tech.
11 months ago, it was only Steve Yegge. now, thanks to the power of software and factories, it could be just about anybody but if i see them i'll tell them you're interested in seeing a prospectus
This feels more like a surface level googling about who assembles the machines. If your castings, precision ball-screws, ways, and controls are being imported, then your import policy needs to take that into consideration or you won't get far.
First time hitting the front page. Definitely made my day as a long time lurker!
When I look at the reindustrialization efforts, the bottleneck keeps showing up in the machines themselves (and the machines that make those machines). The question then shifts from “we need more factories” or "we need robots that run the factories", to the capex, precision components, process knowledge, and industrial base that make modern manufacturing possible.
Curious what people see as the highest-leverage places to tackle.
I am old so I grew up with the panic that the USA does not make the most steel anymore. At the time I thought: wow: we're probably way behind in brick and concrete too.
We still manufacture the most rockets, the most satellites, the most jets, the most missiles etc. I think it is easier to relearn or reinvent the machines that build the machines. Being cutting edge is hard. Tesla essentially had to go back to assembly lines, a technique everyone said Americans can't do anymore and they invented new ways of assembling autos (I'm think building in pieces, not off the frame) that many companies imitated.
A notable milestone was the heavy press program --- but research where Tesla bought its Gigapress and where the now largest/heaviest was recently brought online.
I like this perspective. I think right now there's a lot of exuberance of reindustrializing _everything_ but perhaps the highest ROI is to focus on what America does best, vs. trying to reinvent everything as if we're an island of our own.
Your example kinda belies your thesis. Tesla is producing a substantially worse product than its Chinese competitors and surviving only thanks to protectionism.
Can America build the precision machine parts needed to manufacture useful robots ?
Browsing Michelle Suns other articles gives a great insight into how un-viable it is for American manufacturing to catch up with Chinese manufacturing.
There are pretty massive benefits of scale / density in Shenzen to support every aspect of manufacturing, which are similar to the benefits of VC funding scale in Silicon Valley.
Its hard to reproduce either ecosystem, and impossible to do it quickly.
Even if we use a self-improvement loop that uses AI to train industrial robots to run machine tools, thats going to take some time - maybe more than a decade, even if we hit AGI / ASI in the next 5 years.
and the race to AGI / ASI is already being throttled by compute, which is being limited by the rate at which we can build datacenters and get power sources for them - some GPUs are sitting in warehouses, they might even lose half their value before they get installed.
Perhaps a better outcome for everyone is a detente, a re-invigoration of the free trade cooperation/competition that gave us this incredible growth and prosperity the past 40 years, with its intimately co-mingled supply chains ?
Its probable that engineers in Shenzen can innovate faster in using AI to run robots to run machine tools to manufacture machine tools and parts for robots, than America can. Their AI chips and LLM models are good enough, only getting better.
exactly re your last point. While there's a lot of opportunities to optimize factories with AI, Shenzhen factories can do the same with agents and cheaper LLMs.
My guess is that the US (and western countries) can likely build a decent supply base for price-insensitive verticals like defense, through a mix of venture capital support and govt budget. And it's still worth doing for AI / physical AI sovereignty.
I guess the counter-argument would be the rapid innovation of SpaceX engines and catching both starship stages and the scaling up of Tesla car and robot production.
Not to mention the very successful Artemis Moon loop mission - clearly America _can_ innovate in manufacturing / physical tech.
Kinda? The high failure rate of both of those is not a great testament to success though.
ASML.
Best article to understand what ASML is all about - https://worksinprogress.co/issue/the-worlds-most-complex-mac...
11 months ago, it was only Steve Yegge. now, thanks to the power of software and factories, it could be just about anybody but if i see them i'll tell them you're interested in seeing a prospectus
AI Slop?
This feels more like a surface level googling about who assembles the machines. If your castings, precision ball-screws, ways, and controls are being imported, then your import policy needs to take that into consideration or you won't get far.
That wasn't my impression .. and the author has many articles on related subjects that seem to be her own opinions.
It might be hard to model this domain well, but she seems to be discussing it rationally, diving into the details.
thanks @jgord!
@showerst the research is ai-assisted, the writing is not perfect but hopefully not slop :')
my hope is to invite discourse from more parties to think through this important topic for US industrial future